HP Armada 4200 Armada 4100 and 4200 Families of Personal Computers Maintenance - Page 145
Lower PCMCIA Door, Remove the clutch cover
View all HP Armada 4200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
5.9.2 Lower PCMCIA Door To remove the lower PCMCIA door, complete the following procedures: 1. Disconnect the AC power and any external devices (Section 5.3.1). 2. Undock the computer from the auxiliary base, if necessary (Section 5.3.2). 3. Remove all battery packs (Section 5.4.3). 4. Remove the pointing device (Section 5.3.5). 5. Remove the hard drive. (Section 5.3.6). 6. Remove the CPU base cover (Section 5.5.4). 7. Remove the processor shield and the processor (Section 5.5.5). 8. Remove the CPU cover/keyboard assembly (Section 5.5.6). 9. Remove the display assembly (Section 5.6). 10. Remove the clutch cover (Section 5.7.1). 11. Remove the system board (Section 5.8.1). 12. Remove the upper PCMCIA door (Section 5.9.1). 13. Grasp the lower door in the middle, push it forward, and flex it towards the inside of the computer. This allows the rear pin of the door to slide out of its slot while the spring is being compressed. Removal and Replacement Procedures 5-57