HP Armada 4200 Armada 4100 and 4200 Families of Personal Computers Maintenance - Page 138
connector in place., Replace the five screws that secure the system I/O board to the magnesium frame.
View all HP Armada 4200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
To replace the system board, complete the following procedures: 1. Insert the system board, rear end first, into the magnesium frame. 2. Replace the six screwlocks that secure the I/O connectors to the magnesium frame. Begin with the center pair of screwlocks and move outward, alternating from side to side. 3. Replace the five screws that secure the system I/O board to the magnesium frame. Begin with the left rear screw and move outwards. Follow the insertion sequence shown in the following figure. Figure 5-48. Installing the System Board Screws 4. Turn the computer top side up and install the two nuts that secure the expansion connector in place. 5-50 Removal and Replacement Procedures
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5-50
Removal and Replacement Procedures
To replace the system board, complete the following procedures:
1.
Insert the system board, rear end first, into the magnesium frame.
2.
Replace the six screwlocks that secure the I/O connectors to the magnesium frame.
Begin with the center pair of screwlocks and move outward, alternating from side to
side.
3.
Replace the five screws that secure the system I/O board to the magnesium frame.
Begin with the left rear screw and move outwards. Follow the insertion sequence
shown in the following figure.
Figure 5-48.
Installing the System Board Screws
4.
Turn the computer top side up and install the two nuts that secure the expansion
connector in place.