HP DesignJet T830 User guide - Page 42

Unload a single sheet, Use the multi-sheet tray, second extension for A3 paper.

Page 42 highlights

Unload a single sheet To unload a sheet, go to the front panel and touch the paper tab, touch , then Unload single sheet. The sheet unloads out of the front of the printer; either catch it manually or allow it to fall into the bin. After unloading, the multi-sheet tray is the default active paper source. Use the multi-sheet tray 1. If no roll is loaded or the roll has run out of paper, the multi-sheet tray is active by default. Alternatively, at the front panel, touch , then Use multi-sheet tray. If a roll or single sheet is already loaded, you have to wait while it is automatically unloaded. 2. Adjust the input tray extensions depending on the length of the paper: the first extension for A4 and the second extension for A3 paper. 3. Adjust the output tray extensions depending on the length of the paper. 4. Load sheets of paper into the tray with the printed side facing outwards. Ensure that the sheets are all of the same size, and that they reach the bottom of the tray. 38 Chapter 5 Paper handling ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203

Unload a single sheet
To unload a sheet, go to the front panel and touch the paper tab, touch
, then
Unload single sheet
.
The sheet unloads out of the front of the printer; either catch it manually or allow it to fall into the bin.
After unloading, the multi-sheet tray is the default active paper source.
Use the multi-sheet tray
1.
If no roll is loaded or the roll has run out of paper, the multi-sheet tray is active by default.
Alternatively, at the front panel, touch
, then
Use multi-sheet tray
. If a roll or single sheet is already
loaded, you have to wait while it is automatically unloaded.
2.
Adjust the input tray extensions depending on the length of the paper: the first extension for A4 and the
second extension for A3 paper.
3.
Adjust the output tray extensions depending on the length of the paper.
4.
Load sheets of paper into the tray with the printed side facing outwards. Ensure that the sheets are all of
the same size, and that they reach the bottom of the tray.
38
Chapter 5
Paper handling
ENWW