HP EliteDesk 800 Maintenance and Service Guide - HP EliteDesk 800 G1 Tower, HP - Page 104
System board and PCI expansion slot daughter card
View all HP EliteDesk 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
System board and PCI expansion slot daughter card NOTE: All system board spare part kits include replacement thermal material. Description System board for use in models without Windows 8 System board for use in models with Windows 8 Standard System board for use in models with Windows 8 Professional System board for use in models with NetClone HP PCI expansion slot daughter card Spare part number 696969-001 696969-501 696969-601 727720-001 696971-001 1. Prepare the computer for disassembly (Preparation for disassembly on page 44). 2. Remove the access panel (Access panel on page 45). 3. When replacing the system board, make sure the following components are removed from the defective system board and installed on the replacement system board: ● Memory modules (Memory on page 50) ● Expansion cards (Expansion cards on page 53) ● Fan sink (Fan sink on page 79). ● Processor (Processor on page 81) 4. Disconnect all cables connected to the system board, noting their location for reinstallation. 5. If a PCI expansion slot daughter card is installed, remove the two Torx T15 screws (1) that secure the PCI extension board to the chassis. 92 Chapter 5 Removal and replacement procedures: Tower (TWR)