HP EliteDesk 800 Maintenance and Service Guide - HP EliteDesk 800 G1 Tower, HP - Page 71

Drives Description Optical drives DVD±RW drive DVD-ROM drive Blu-ray BD-RW SuperMulti XL Drive Hard drives 2 TB, 7200 rpm hard drive 1 TB hard drive, hybrid SSD 1 TB, 10000 rpm hard drive 1 TB, 7200 rpm hard drive 750 GB, 7200 rpm, 2.5-inch hard drive, hybrid SSD 500 GB, 10000 rpm hard drive 500 GB, 7200 rpm, 2.5-inch hard drive, self-encrypting (SED) 500 GB, 7200 rpm hard drive 500 GB hard drive, hybrid SSD 256 GB Solid State Drive (SSD), self-encrypting (SED) 128 GB Solid State Drive (SSD) 32 GB mSATA drive Spare part number 657958-001 608394-001 719157-001 616608-001 724937-001 719106-001 613202-001 719105-001 683923-001 696442-001 696442-001 724938-001 680020-001 665961-001 686616-001 When installing drives, follow these guidelines: ● The primary Serial ATA (SATA) hard drive must be connected to the dark blue primary SATA connector on the system board labeled SATA0. ● Connect secondary hard drives and optical drives to any of the light blue SATA connectors on the system board (labeled SATA1, SATA2, SATA3, and SATA5). ● Connect a media card reader USB 3.0 cable to the USB connector on the system board labeled MEDIA3.0. ● The power cable for the drives has two branches coming off the system board connector. The first branch is a three-headed cable with the first connector routed to the 5.25-inch bay, the second connector routed to the 3.5-inch bay, and the third (two-wire) connector routed to the slim optical drive bay. The second branch is a three-headed cable with the first connector routed to the bottom 2.5-inch hard drive bay, the second connector routed to the middle 3.5-inch hard drive bay, and the third connector routed to the top 3.5-inch hard drive bay. ● You must install guide screws to ensure the drive will line up correctly in the drive cage and lock in place. HP has provided extra guide screws (four 6-32 silver and blue isolation mounting guide Drives 59