HP EliteDesk 800 Maintenance and Service Guide - HP EliteDesk 800 G1 Tower, HP - Page 146
Speaker, Remove the two Torx screws that secure the speaker to the chassis.
View all HP EliteDesk 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Speaker Description Speaker Spare part number 727149-001 The speaker is attached to the front of the chassis under the rotating drive cage. 1. Prepare the computer for disassembly (Preparation for disassembly on page 94). 2. Remove the access panel (Access panel on page 95). 3. Remove the front bezel (Front bezel on page 96). 4. Rotate the drive cage to its upright position. 5. Disconnect the speaker wire from the white system board connector labeled SPKR. 6. Remove the two Torx screws that secure the speaker to the chassis. 7. Lift the speaker from the inside of the chassis to remove it. To install the speaker, reverse the removal procedures. 134 Chapter 6 Removal and replacement procedures: Small Form Factor (SFF)
Speaker
Description
Spare part number
Speaker
727149-001
The speaker is attached to the front of the chassis under the rotating drive cage.
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
94
).
2.
Remove the access panel (
Access panel
on page
95
).
3.
Remove the front bezel (
Front bezel
on page
96
).
4.
Rotate the drive cage to its upright position.
5.
Disconnect the speaker wire from the white system board connector labeled SPKR.
6.
Remove the two Torx screws that secure the speaker to the chassis.
7.
Lift the speaker from the inside of the chassis to remove it.
To install the speaker, reverse the removal procedures.
134
Chapter 6
Removal and replacement procedures: Small Form Factor (SFF)