HP EliteDesk 800 Maintenance and Service Guide - HP EliteDesk 800 G1 Tower, HP - Page 183
Remove the drive cage, Remove the hard drive
View all HP EliteDesk 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
System board Description System board for use in models without Windows 8 System board for use in models with Windows 8 Standard System board for use in models with Windows 8 Professional System board for use in NetClone models Front I/O panel Spare part number 696970-001 696970-501 696970-601 727721-001 732762-001 CAUTION: Be very careful when removing or replacing the system board to prevent damaging it. 1. Prepare the computer for disassembly (Preparation for disassembly on page 141). 2. Remove the access panel (Access panel on page 142). 3. Remove the memory modules (Memory on page 147). 4. Remove the front fan (Front fan on page 150). 5. Remove the optical drive (Removing the optical drive on page 151). 6. Remove the hard drive (Hard drive on page 154). 7. Remove the drive cage (Drive cage on page 164). 8. Remove the heat sink (Heat sink on page 157). 9. Disconnect the rear fan cable from the system board. 10. Remove the power button cable from atop the front I/O panel. 11. Disconnect any remaining cables connected to the system board, noting their location for reinstallation. 12. Remove the front I/O panel: a. Remove the Torx T15 screw from the right side of the panel that secures it to the front of the chassis. System board 171