HP EliteDesk 800 Maintenance and Service Guide - HP EliteDesk 800 G1 Tower, HP - Page 88
Front I/O assembly, Rotate the right side of the assembly outward
View all HP EliteDesk 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Front I/O assembly Description Front I/O assembly Spare part number 732750-001 1. Prepare the computer for disassembly (Preparation for disassembly on page 44). 2. Remove the access panel (Access panel on page 45). 3. Remove the front bezel (Front bezel on page 47). 4. Disconnect the three front I/O cables from the following system board connectors: ● FRONT USB ● MEDIA 3.0 ● FRONT AUD 5. Remove the Torx T15 screw that secures the assembly to the chassis (1). 6. Rotate the right side of the assembly outward (2). 7. Pull the assembly away from the computer while threading the wires through the hole in the front of the chassis. To reinstall the assembly, reverse the removal procedure. 76 Chapter 5 Removal and replacement procedures: Tower (TWR)