HP EliteDesk 800 Maintenance and Service Guide - HP EliteDesk 800 G1 Tower, HP - Page 94
Speaker, From the inside of the chassis, remove the Torx T15 screw - bios
View all HP EliteDesk 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
NOTE: After installing a new processor onto the system board, always update the system ROM to ensure that the latest version of the BIOS is being used on the computer. The latest system BIOS can be found on the Web at: http://www8.hp.com/us/en/support-drivers.html. Speaker Description Speaker Spare part number 645330-001 1. Prepare the computer for disassembly (Preparation for disassembly on page 44). 2. Remove the access panel (Access panel on page 45). 3. Disconnect the speaker wire from the system board connector labeled SPKR (1). 4. From the inside of the chassis, remove the Torx T15 screw (2) that secures the speaker to the front of the chassis. 5. Rotate the top of the speaker downward (3), and then remove it from the chassis. To replace the speaker, reverse the removal procedures. 82 Chapter 5 Removal and replacement procedures: Tower (TWR)