HP EliteDesk 800 Maintenance and Service Guide - HP EliteDesk 800 G1 Tower, HP - Page 60
Bezel blanks
View all HP EliteDesk 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Bezel blanks Description Optical drive bezel blank Spare part number 732770-001 On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch drive bays that need to be removed before installing a drive. To remove a bezel blank: 1. Remove the access panel (Access panel on page 45) 2. Remove the front bezel (Front bezel on page 47) 3. Remove the bezel blank for the appropriate drive: ● To remove a 5.25-inch bezel blank, press inward on the retaining tabs that hold the bezel blank in place (1) then pull the bezel blank from the front bezel (2). NOTE: After removing the 5.25-inch drive bezel blank and installing a drive, you can install an optional bezel trim piece (available from HP) that surrounds the front of the drive. 48 Chapter 5 Removal and replacement procedures: Tower (TWR)