HP LH4r HP Netserver LPr Installation Guide - Page 56
HP NetRAID Series Installation and, Configuration Guide
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Chapter 7 Installing Additional Boards 2. Connect the SCSI cable to a SCSI channel connector on the NetRAID card. To choose a channel refer to HP NetRAID Series Installation and Configuration Guide (January 1998). CAUTION Do not bend the PCI card to fit it into the slot. Check to make sure you removed any handles or board extenders as shown in Figure 7-1. Figure 7-8. Connecting the SCSI Cable to the NetRAID Adapter 48
Chapter 7
Installing Additional Boards
48
2.
Connect the SCSI cable to a SCSI channel connector on the NetRAID
card. To choose a channel refer to
HP NetRAID Series Installation and
Configuration Guide
(January 1998).
CAUTION
Do not bend the PCI card to fit it into the slot. Check to make
sure you removed any handles or board extenders as shown in
Figure 7-1.
Figure 7-8. Connecting the SCSI Cable to the NetRAID Adapter