HP LH4r HP Netserver LPr Installation Guide - Page 65
Upgrading the Firmware
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Chapter 8 Installing Additional Processors 6. Move the light blue plastic levers as shown to fully seat the processor module. VRM Connector Latch Move levers to upright position to seat processor module. Figure 8-5. Levers for Seating the Processor Module NOTE Be sure that the VRM and the processor module associated with it are both in primary or secondary slots. Upgrading the Firmware Load the HP NetServer Navigator CD-ROM and then power on the LPr. Follow instructions to ensure that the BIOS is up-to-date. 57
Chapter 8
Installing Additional Processors
57
6.
Move the light blue plastic levers as shown to fully seat the processor
module.
VRM Connector Latch
Move levers to upright position
to seat processor module.
Figure 8-5. Levers for Seating the Processor Module
NOTE
Be sure that the VRM and the processor module associated
with it are both in primary or secondary slots.
Upgrading the Firmware
Load the
HP NetServer Navigator CD-ROM
and then power on the LPr. Follow
instructions to ensure that the BIOS is up-to-date.