HP LaserJet Managed MFP E82540-E82560 On-Site Installation Guide - Page 47
Initial power on, Install imaging drum (HP Color LaserJet MFP E87640, E87650
View all HP LaserJet Managed MFP E82540-E82560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Initial power on Install imaging drum (HP Color LaserJet MFP E87640, E87650, E87660) . Click here to view a video for this procedure. NOTE: The technician must be trained and qualified/certified to perform this activity. CAUTION: To prevent damage to the printer, use only the power cord that is provided with the printer. CAUTION: The scanner lock screw must be removed prior to powering on the printer. A label with the printer voltage rating is located on the back of the printer. NOTE: Make sure that the power source is adequate for the printer voltage rating. The voltage rating is on the printer label. The printer uses either 110-127 Vac or 220-240 Vac and 50/60 Hz. 1. Remove the shipping material from each of the developing units by pulling the red tape down off the engine and then pull straight out of the developing unit. CAUTION: Ensure all shipping tape is removed. 1 2 ENWW Initial power on 41