HP LaserJet Managed MFP E82540-E82560 On-Site Installation Guide - Page 51
Install imaging drum (HP LaserJet MFP E82540, E82550, E82560
![]() |
View all HP LaserJet Managed MFP E82540-E82560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Install imaging drum (HP LaserJet MFP E82540, E82550, E82560) Click here to view a video of this procedure. NOTE: The technician must be trained and qualified/certified to perform this activity. CAUTION: To prevent damage to the printer, use only the power cord that is provided with the printer. CAUTION: The scanner lock screw must be removed prior to powering on the printer. A label with the printer voltage rating is located on the back of the printer. NOTE: Make sure that the power source is adequate for the printer voltage rating. The voltage rating is on the printer label. The printer uses either 110-127 Vac or 220-240 Vac and 50/60 Hz. 1. Open the right door by grasping latch and releasing in the direction of the arrow. 1 2 ENWW Initial power on 45
![](/manual_guide/products/hewlettpackard-laserjet-e80000-onsite-installation-guide-3a490dc/51.png)