HP LaserJet Managed MFP E82540-E82560 On-Site Installation Guide - Page 86
Table 8-3
![]() |
View all HP LaserJet Managed MFP E82540-E82560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Table 8-3 Cabinet installation (continued) ❑ While holding the rail, slide the sHCI into the rail until it stops. ❑ Install the pin to secure the rail to the sHCI and secure the two screws. ❑ Connect the sHCI cable to the engine. ❑ Push the sHCI firmly toward the engine to engage the locking mechanism. ❑ Check the vertical gap between the engine and the sHCI. It should be equal from the top to the bottom. ❑ If not equal, unlatch and move the sHCI away. Adjust the leveling feet on the engine until the gap is equal. 80 Chapter 8 Complete installation procedures ENWW
![](/manual_guide/products/hewlettpackard-laserjet-e80000-onsite-installation-guide-3a490dc/86.png)
Table 8-3
Cabinet installation (continued)
❑
While holding the rail, slide the sHCI into the rail until it stops.
❑
Install the pin to secure the rail to the sHCI and secure the two screws.
❑
Connect the sHCI cable to the engine.
❑
Push the sHCI firmly toward the engine to engage the locking mechanism.
❑
Check the vertical gap between the engine and the sHCI. It should be equal from the top to the bottom.
❑
If not equal, unlatch and move the sHCI away. Adjust the leveling feet on the engine until the gap is equal.
80
Chapter 8
Complete installation procedures
ENWW