HP LaserJet P2050 Service Manual - Page 168
Laser/scanner assembly, WARNING, CAUTION,
View all HP LaserJet P2050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Laser/scanner assembly WARNING! ESD sensitive component. CAUTION: Do not bend or fold the flat flexible cables (FFCs) during removal or installation. Also, do not straighten pre-folds in the FFCs. You must make sure that all FFCs are fully seated in their connectors. Failure to fully seat an FFC into a connector can cause a short circuit in a PCA. 1. Remove the following components: ● Right cover. See Right cover on page 115. ● Left cover. See Left cover on page 118. ● Rear cover, rear door, and duplex-paper-feed assembly. See Rear cover, rear door, and duplex-paper-feed assembly on page 120. NOTE: Only the HP LaserJet P2050 Series products have a duplex-paper-feed assembly installed. 2. Disconnect one FFC (callout 1), and then remove the antistatic foam pad (callout 2). CAUTION: Do not bend or fold the flat flexible cables (FFCs) during removal or installation. Also, do not straighten pre-folds in the FFCs. You must make sure that all FFCs are fully seated in their connectors. Failure to fully seat an FFC into a connector can cause a short circuit in a PCA. Figure 6-86 Remove the laser/scanner assembly (1 of 2) 2 1 156 Chapter 6 Removal and replacement ENWW