HP LaserJet P2050 Service Manual - Page 232
Control-panel message, Event code, Description, Recommended action, X.Error, Turn off then
View all HP LaserJet P2050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 232 highlights
Control-panel message Press [OK] 41.X.Error Event code 49 Error Turn off then on 50.X Fuser error Turn off then on 50.0000 50.1000 50.3000 50.4000 50.7000 50.8000 50.9000 Description Recommended action match the configuration for the tray. A temporary printing error has occurred. size that you have loaded. See Load trays on page 38. 1. Make sure that the paper meets specifications. See Supported paper and print media on page 32. If pages stick together, the paper sensors might detect a sheet of paper longer than expected. 2. Verify that the paper size settings in the control panel, printer driver, and software program match. 3. Verify that the correct paper size is loaded in the product. The product experienced an internal error. Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on. The product has experienced an 1. Turn the product power off error with the fuser. and then on. 2. If you have replaced the fuser, make sure that the correct voltage version is installed (110 V or 220 V). 3. Make sure that the following connectors are seated: ◦ J102 on the engine controller PCA (AC voltage) ◦ J210 on the engine controller PCA (TH1) 4. Replace the fuser. See Fuser on page 158. 220 Chapter 7 Solve problems ENWW