HP ML150 HP ProLiant ML100 Series Server User Guide - Page 25
DIMM identification, Memory configurations, Description, Definition - quickspecs
UPC - 884420743644
View all HP ML150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
DIMM identification IMPORTANT: This server does not support mixing RDIMMs and UDIMMs. Attempting to mix these two types causes the server to halt during BIOS initialization. The memory subsystem may be populated with either RDIMMs or UDIMMs, but mixing the two types is not supported. To determine DIMM characteristics, use the label attached to the DIMM and the following illustration and table. Item Description 1 Size 2 Rank 3 Data width 4 Memory speed 5 DIMM type Definition - 1R = Single-rank 2R = Dual-rank 4R = Quad-rank x4 = 4-bit x8 = 8-bit 10600 = 1333-MHz 8500 = 1067-MHz R = RDIMM (registered) E = UDIMM (unbuffered with ECC) For the latest supported memory information, see the QuickSpecs on the HP website (http://www.hp.com). Memory configurations To optimize server availability, the server supports the following AMP modes: • Advanced ECC-provides the greatest memory capacity for a given DIMM size, while providing up to 8-bit error correction, depending on the specific DIMM type. This mode is the default option for this server. Hardware options installation 25