HP Pavilion a400 HP Pavilion Desktop PCs - (English) Users Guide 5990-6416 - Page 120
installing a second hard drive
View all HP Pavilion a400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
installing a second hard drive Some PC models may have an empty bay to add a second hard drive. You must provide the drive and four 6/32 x ¼" screws (length of ¼-inch is 0.64 cm) to secure the drive to the chassis. 1 Remove the side panel. See page 101. 2 Remove the front panel. See page 103. 3 Gently lay the PC on its side. 4 See "removing the preinstalled hard drive" on page 109. NOTE: You do not need to remove the preinstalled hard drive from the bracket when installing a second hard drive. 5 Remove the two screws on the hard drive bracket (N). N O P 6 Slide the bracket away from the bottom of the chassis, and then pull it up and out of the chassis (O). 7 Make sure the jumper on the new drive is in the CS (Cable Select) position. Below is a drive with a Cable Select jumper installed. Your drive may vary. 112 user's guide