HP Pavilion a400 HP Pavilion Desktop PCs - (English) Users Guide 5990-6416 - Page 125
about installing ddr dimms, removing a memory module
View all HP Pavilion a400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
WARNING: Using the wrong type of memory module could damage the system. about installing ddr dimms DDR DIMMs must be 184-pin unbuffered DDR SDRAM (double data rate synchronous dynamic random access memory). The HP Pavilion ships with one or more memory modules, but you can replace the existing memory modules with higher-capacity ones. You can install 128 MB, 256 MB, 512 MB or 1024 MB (1GB) memory modules in the PC. NOTE: Some memory configurations vary, depending on your PC model. 512 MB and 1024 MB DDR DIMM memory modules are not compatible with all PC models. removing a memory module 1 Remove the side panel that has thumbscrews. See page 101. 2 Gently lay the PC on its side. 3 Locate the memory sockets on the motherboard. 4 Move any cabling out of the way, if necessary. 5 Push down the two retaining clips on the ends of the socket until the memory module pops out of the socket. Hold the memory module by its edges only, as you lift it away from the socket. Store it in its antistatic packaging. WARNING: Do not pull the memory module out of the socket. Use the retaining clips to eject the module. upgrading and servicing the pc (1) 117