HP SW TL881 DLT Mini-Lib/1 Compaq StorageWorks TL881/TL891 Family MiniLibrary
HP SW TL881 DLT Mini-Lib/1 Manual
View all HP SW TL881 DLT Mini-Lib/1 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP SW TL881 DLT Mini-Lib/1 manual content summary:
- HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 1
TL881/TL891 Family MiniLibrary System Reference Guide Second Edition (July 2000) Part Number 127510-002 Compaq Computer Corporation - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 2
accompanying such products. Nothing herein should be construed as constituting a further or additional warranty. Printed in the U.S.A. Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Second Edition (July 2000) Part Number 127510-002 - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 3
Contents About This Guide Text Conventions...xiii Symbols in Text...xiv Symbols on Equipment xiv Rack Stability ...xv Getting Help ...xvi Compaq Technical Support xvi Compaq Website xvii Compaq Authorized Reseller xvii Chapter 1 System Description Introduction ...1-1 Modules ...1-1 MiniLibrary - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 4
iv Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Bar Code Reader 1-14 Advanced Design Features 1-14 Embedded Diagnostics 1-14 Error Checking 1-15 Compression 1-15 Capacity ...1-15 Media Life ...1-16 Chapter 2 Operation Introduction...2-1 Expansion - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 5
About This Guide v Inserting and Removing Cartridges 2-28 Removing a Magazine 2-30 Emergency Magazine Removal 2-30 Inserting Cartridges into the Magazine 2-31 Inserting a Magazine 2-32 MiniLibrary Base Module 2-33 - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 6
vi Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Chapter 3 Installation Introduction...3-1 Installation Overview 3-1 Planning Your Installation 3-2 Positioning the Modules 3-3 Mechanical Installation 3-3 Identifying the Parts of the PTM 3-3 Orientation of Parts - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 7
About This Guide vii Chapter 4 Configuration Configuration Overview 4-1 Customizing Your Configuration 4-2 Descriptions of Configuration Cartridge 5-4 Chapter 6 Diagnostics and Troubleshooting Introduction ...6-1 Diagnosing Problems 6-1 Platform Problems 6-1 General Drive Errors 6-2 Error - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 8
viii Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Appendix A Specifications Introduction...A-1 Safety ...A-6 Electromagnetic Emission (EM A-7 Notice...A-7 Industry Canada A-7 Industrie Canada A-7 FCC Notice ...A-7 Acoustic Noise Declaration A-8 FCC and VCCI - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 9
About This Guide ix Appendix F Tape Drives and Cartridges Introduction ...F-1 Care and Handling of Cartridges F-2 Handling and Storage Guidelines F-2 Checking a Cartridge for Damage F-3 Archival Guidelines F-6 Transportation Guidelines F-7 Cleaning - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 10
x Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Figure 2-17. Data unit rear view 2-47 Figure 3-1. PTM cables (SCSI-2 interface, daisy-chained connection shown 3-28 Figure 6-1. Troubleshooting flowchart 6-3 Figure D-1. Parts location D-2 Figure D-2. Removing the skin - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 11
About This Guide xi List of Tables Table 1-1 Expansion Unit Front View 1-3 Table 1-2 MiniLibrary Base Module Front View 1-5 Table 1-3 Data Unit Front View 1-6 Table 1-4 MiniLibrary Base Module 10- - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 12
xii Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Table 6-3 SCSI Error Codes (1xxx 6-6 Table 6-4 Control Error Codes (2xxx 6-7 Table 6-5 Motor Process Error Codes (3xxx 6-10 Table 6-6 Power-On Error Codes (4xxx 6-13 Table 6-7 - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 13
About This Guide This guide is designed to be used as step-by-step instructions for installation and as a reference for operation, troubleshooting, and future upgrades. Text Conventions This document uses the following conventions to distinguish elements of text: Keys USER INPUT FILENAMES Menu - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 14
in the text of this guide. They have the following off in this manner presents clarifying information or specific instructions. NOTE: Text set off in this manner presents of electrical shock hazards. Enclosed area contains no operator serviceable parts. WARNING: To reduce the risk of injury from - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 15
About This Guide xv Any surface or area of the equipment marked with these personal injury or damage to the equipment, observe local occupational health and safety requirements and guidelines for manual material handling. Rack Stability WARNING: To reduce the risk of personal injury or damage to the - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 16
for as long you own the product. A technical support specialist will help you diagnose the problem or guide you to the next step in the warranty process. In North America, call the Compaq Technical Phone Support Center at 1-800-OK-COMPAQ1. This service is available 24 hours a day, 7 days a week - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 17
About This Guide xvii Compaq Website The Compaq website has information on this product as well as the latest drivers and Flash ROM images. You can access the - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 18
is designed for high duty-cycle on-line and near-on-line applications. It is a superior performer in high-volume backup and archival service. Modules The MiniLibrary system is based on three types of modules: I Expansion Unit (master) I MiniLibrary Base Module I Data Unit The MiniLibrary system - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 19
1-2 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide In a MiniLibrary system, you can combine modules to provide the right combination of capacity and performance to meet your present storage requirements. The Compaq MiniLibrary - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 20
System Description 1-3 Expansion Unit The Expansion Unit (Figure 1-1) integrates the robotics in the individual modules into a single, coordinated library robotics system. The Expansion Unit performs and maintains an inventory of all media present in the system, including bar code data. All - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 21
Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide In addition to its system control functions, SCSI IMPORT/EXPORT commands. NOTE: A magazine that has been reserved for import/export service can not be used for data storage. MiniLibrary Base Module The MiniLibrary Base Module - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 22
1 2 3 Use Cleaner Drive Fault LFoaaudlet r System Description 1-5 4 5 6 Figure 1-2. MiniLibrary base module front view SHR-1678 Table 1-2 MiniLibrary Base Module Front View Figure Legend 1 2 3 4 5 6 Description 10-cartridge magazine Magazine security lock Control panel Unlock/Open - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 23
1-6 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Data Unit The Data Unit (Figure 1-3) has a 16-cartridge magazine and a random access robotic mechanism, but no tape drives. The module robotics, under control of - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 24
System Description 1-7 SCSI Interface Configurations DLT drives in TL891 MiniLibraries use either a fast-wide High Voltage Differential (HVD) or a fast-wide, single-ended SCSI interface. The choice must be made at the time of purchase. DLT drives in a TL891 MiniLibrary system use a fast-wide HVD - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 25
1-8 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Physical Configuration The Expansion Unit must be mounted at the top of the stack, which places its control panel at a convenient height. The control panels - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 26
System Description 1-9 1 4 3 2 Figure 1-4. MiniLibrary base module 10-cartridge magazine SHR-1680 Table 1-4 MiniLibrary Base Module 10-Cartridge Magazine Figure Legend 1 2 3 4 Description Slot 0 Front label slide slot Bar code label slide slot (not used) Slot 9 - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 27
1-10 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide 1 5 4 3 2 Figure 1-5. Expansion unit rear view SHR-1681 Table 1-5 Expansion Unit Rear View Figure Legend 1 2 3 4 5 Description PTM motor drive connector Power connector Base Module robotics interface - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 28
System Description 1-11 1 4 3 2 Figure 1-6. MiniLibrary base module rear view SHR-1682 Table 1-6 MiniLibrary Base Module Rear View Figure Legend 1 2 3 4 Description SCSI bus interface: MiniLibrary* (left two connectors) Drive 0 (middle two connectors) Drive 1 (right two connectors) Expansion - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 29
1-12 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide 1 2 1 Figure 1-7. Data unit rear view Table 1-7 Data Unit Rear View Figure Legend 1 2 Description Power connector Diagnostics connector SHR-1683 Control Panel The control panels for - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 30
System Description 1-13 Display The backlit, 4-line by 20-character control panel display provides a highly intelligible presentation of drive and loader status, menu choices, and error messages. The scrolling feature greatly expands the amount of information available to you. In the Expansion Unit, - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 31
14 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Integral Fan Cooling A single forced-air fan Engineer (CE) diagnostics, include advanced diagnostics to be used by CEs for servicing the MiniLibrary system. Both the User diagnostics and the CE diagnostics can be selected - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 32
System Description 1-15 Error Checking Drives used in the MiniLibrary system apply a 16-bit parity check to each record, a 64-bit CRC to each 4 KB of data, and Reed-Solomon error correction code overall. There is also an internal parity check on the data buffer. Compression MiniLibrary system drives - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 33
1-16 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Table 1-8 Base Module Tape Capacities Model Cartridge TL881 TL891DLX TL891 DLTtape IV DLTtape IV DLTtape IV Magazine Capacity 10 10 10 Full Magazine Uncompressed1 200 - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 34
2 Chapter Operation Introduction This chapter describes manual operation of the MiniLibrary system. The system is operated manually through the MiniLibrary Expansion Unit control panel. Online and offline operations can be done through the control panels of the MiniLibrary Base Module and the - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 35
2-2 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Expansion Unit Figure 2-1 shows the front panel of the Expansion Unit (Table 2-1). The panel includes a power switch and the control panel, which has pushbuttons, LED - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 36
. The Fault screen is described later in this chapter. A list of Fault Symptom Codes (FSC) and Error Recovery Procedures (ERP) shown in Chapter 6, "Diagnostics and Troubleshooting." - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 37
2-4 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Ready Alert Escape Enter Fault Figure 2-2. Expansion unit control panel SHR-1685 Pushbuttons There are four buttons on the control panel, labeled Escape, Enter, , and . - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 38
Operation 2-5 NOTE: When you enter Menu Mode at the Expansion Unit, the Ready light on that module goes out. This means that the MiniLibrary system is off-line, and the system responds to all commands from the host with a SCSI Not Ready until you exit Menu Mode and the Ready light goes on. When you - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 39
2-6 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide NOTE 2: This button is sampled during power-up while all control panel LEDs are on. If it is pressed during that time, the system updates - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 40
Operation 2-7 Table 2-3 MiniLibrary Base Module Front View Figure Legend 1 2 3 4 5 6 Description 10-cartridge magazine Magazine security lock Control panel Unlock/Open button Locked indicator Power switch Power Switch The power switch controls the supply of AC power to the module. The switch is - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 41
2-8 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide I Use Cleaner (yellow) - indicates that either or both drives require cleaning. A cleaning operation should be done as described in Chapter 5, "Regular Maintenance." When the Use - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 42
Operation 2-9 Data Unit Figure 2-5 shows the front panel of the Data Unit (Table 2-4). The panel includes a power switch and the control panel, which has pushbuttons, LED indicators, and a display. 1 2 3 4 Figure 2-5. Data unit front panel 5 6 Table 2-4 Data Unit Front Panel Figure Legend 1 2 3 - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 43
2-10 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Power Switch The power switch controls the supply of AC power to the unit. The switch is recessed into the front panel to prevent accidental - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 44
screen is described later in this chapter. A list of Fault Symptom Codes (FSC) and Error Recovery Procedures (ERP) are shown in Chapter 5, "Troubleshooting." Pushbuttons The pushbuttons on the Data Unit control panel operate the same way as the pushbuttons on the Expansion Unit control panel. See - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 45
2-12 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Starting the System CAUTION: When powering up the MiniLibrary, power must be applied to the Expansion Unit either simultaneously with or after the other modules. - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 46
Operation 2-13 Initialization Screens After POST completes, the library robotics system is initialized. A series of screens similar to the following appears during this process: COMPAQ TL89x Firmware Level 0X.xx Initializing Loader 26-Feb-19xx 15:35:59 Default Screen After the POST diagnostics have - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 47
Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide The first line shows a numerical FSC. screen. A list of FSC and ERP appears in Chapter 6, "Diagnostics and Troubleshooting." MiniLibrary Base Module Default Screen The MiniLibrary Base Modules display a different Default screen - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 48
Operation 2-15 I Hard error I In flux I Fault The third line in a MiniLibrary Base Module tells the status of the library robotics (loader) within the MiniLibrary Base Module. The possible conditions of the library robotics are: I Idle I Fetch/stow I Taking inventory I Checking drives I Scanning - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 49
2-16 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide The MiniLibrary System Menu Structure Figure 2-7 shows the structure of the MiniLibrary System menus. Power-Up Displays Default Displays Panel Lock* Main Menu Fault Displays - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 50
Operation 2-17 Entering the Menu Mode IMPORTANT: When the Expansion Unit enters Menu Mode, the Ready light goes out. This means that the module is off-line, and responds to all commands from the host with a SCSI Not Ready until you exit Menu Mode and the Ready light comes on. To prevent - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 51
2-18 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Exiting the Menu Mode To leave the menu mode and return to the Default screen, press the Escape button repeatedly. Each time you press the - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 52
Operation 2-19 The items available on the Show Status menu are: I Library I DLT0 I DLT1 I ... I DLTn I Map Info Move the up or down with the and buttons, then press the Enter button to select the item. Library Status Submenu When you select Library Status, the following scrollable menu appears: - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 53
2-20 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Table 2-5 lists the Library Status categories that are available. Category Model number Date Loader status Vendor identification Transport address Transfer address Serial number SCSI bus - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 54
Operation 2-21 Table 2-6 lists the Drive Status parameters that are available. Parameter Compression Drive rev Cartridge present Cleaning needed Operate handle Read compression Tape remaining Clean cartridge count Power on hours Speed setting Temperature Table 2-6 Drive Status Parameters - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 55
2-22 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide The list of locations available for display on line 1 is as follows: NOTE: If you do not designate any mail slots, those lines are omitted - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 56
Operation 2-23 When you select the Security menu, the following scrollable screen appears: Unlock All Panels Unlock All Media Lock All Panels Lock All Media Table 2-7 lists the security functions that are available. Category Unlock all panels Lock all panels Master locking . . . Set unlock code - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 57
StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Your code is shown in place of XXXX screen appears. If you have forgotten your unlock code, contact your technical support representative for assistance. Displaying Firmware Revision You can display the library robotics firmware - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 58
Operation 2-25 Displaying Error Logs To display the error history of the module, you need to use the Show History menu. Access this menu as follows: Fault Code: XXXX Error Description DD/MMM/YYYY HH:MM:SS Entry NNNN Of NNNN Loading and Unloading Tapes The Load/Unload menus let you specify a source - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 59
2-26 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Notice that the is next to line 2 of the display. Line 2 shows the top item in a scrollable list of sources. Note that a has appeared on - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 60
Operation 2-27 Assume that you want to load the cartridge that is in Slot 4 into any available drive. Use the button to scroll line two to Slot 4. Afterwards, the following screen appears: From: Slot4 To: *DLT0 When you scrolled to your desired source, press the Enter button to select it. Notice the - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 61
2-28 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide When you press the Enter button, the following screen appears. If the source is a drive, the word Unload appears in place of the word Load - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 62
Operation 2-29 1 Figure 2-8. Magazine in place Figure Legend 1 2 Table 2-8 Magazine In Place Description Magazine security lock Unlock/Open button 2 SHR-1691 - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 63
2-30 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Removing a Magazine The following screens help you remove a magazine. Load/Unload Show you are unsuccessful in removing the magazine using this procedure, contract your technical support representative for further advice. - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 64
Operation 2-31 Inserting Cartridges into the Magazine A full magazine is shown in Figure 2-9 (see Table 2-9). Insert cartridges so that the label end with the write protect switch is outward, with the write protect switch toward the bottom of the magazine. The lowest-numbered cartridge slot in the - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 65
2-32 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Inserting a Magazine The following screens help you insert a magazine. Load/Unload Show Status Menu Maintenance Menu Configuration Menu Maintenance Menu Configuration Menu Show History Menu - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 66
Operation 2-33 MiniLibrary Base Module The front panel of the Base Module is nearly identical to the Expansion Unit. It includes a power switch for the module, the magazine door, the magazine security lock, and the Unlock/Open button with its Locked indicator. The control panel, shown in Figure - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 67
2-34 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Tape Requirements The MiniLibrary system uses ECMA-approved, ANSI proposed-standard DLT tape cartridges. The DLT tape cartridge is a four-inch square plastic cartridge. DLT - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 68
Operation 2-35 execute, with resulting errors or hangs, failure to unload, and apparent need to swap out the drive are a few such conditions. NOTE: DLT tape cartridges should be stored vertically, in their original translucent plastic boxes, until you want to reuse them and after they have been - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 69
2-36 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide 1 2 3 Figure 2-11. DLT tape cartridge Table 2-12 DLT Tape Cartridge Figure Legend 1 2 3 Description Leader Write protect OFF Write protect ON SHR-1694 Write Protection The - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 70
Operation 2-37 Barcode Labels Barcode labels are included with the MiniLibrary and Expansion Unit. Additional labels can be ordered (see Appendix B). The label slips into the slot adjacent to the write-protect switch on each tape cartridge. The code used can be Code 39, Codebar, 2-of-9, standard 2- - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 71
2-38 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Storage Architecture The MiniLibrary architecture is uniquely suited and designed for implements the SCSI IMPORT/EXPORT commands. NOTE: A magazine reserved for import/export service can not be used for data storage. - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 72
Operation 2-39 MiniLibrary Base Module The MiniLibrary Base Module has either one or two DLT drives and a 10-cartridge magazine with a random access robotic mechanism. Data Unit The Data Unit has a 16-cartridge magazine, a random access robotic mechanism, and no tape drives. The module robotics, - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 73
40 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Internal Cabling Configuration The differential MiniLibrary system is wired to rackmount. These tasks should be performed by qualified service personnel. Contact your technical support representative for instructions. - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 74
Operation 2-41 Features Figures 2-12 through 2-16 show some of the external features of the Expansion Unit, the MiniLibrary Base Module, and the Data Unit (see Tables 2-13 through 2-17). 1 2 3 4 5 6 Figure 2-12. Expansion unit and data unit front view SHR-1677 Table 2-13 Expansion Unit and Data - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 75
2-42 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide 1 2 3 Use Cleaner Drive Fault LFoaaudlet r 4 5 6 Figure 2-13. MiniLibrary base module front view SHR-1678 Table 2-14 MiniLibrary Base Module Front View Figure Legend 1 2 3 4 5 6 Description 10- - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 76
Operation 2-43 1 4 3 2 Figure 2-14. MiniLibrary base module 10-cartridge magazine SHR-1680 Table 2-15 MiniLibrary Base Module 10-Cartridge Magazine Figure Legend 1 2 3 4 Description Slot 0 Front label slide slot Barcode label slide slot (not used) Slot 9 - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 77
2-44 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide 1 5 4 3 2 Figure 2-15. Expansion unit rear view SHR-1681 Figure Legend 1 2 3 4 5 Table 2-16 Expansion Unit Rear View Description PTM motor drive Power connector Slave module robotics - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 78
Operation 2-45 1 4 3 2 Figure 2-16. MiniLibrary base module rear view SHR-1682 Table 2-17 MiniLibrary Base Module Rear View Figure Legend 1 2 3 4 Description SCSI bus interface: MiniLibrary (left two connectors) Drive 0 (middle two connectors) Drive 1 (right two connectors) Expansion unit - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 79
2-46 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Display The backlit, 4-line by 20-character control panel display provides a highly intelligible presentation of drive and loader status, menu choices and error messages. The - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 80
Operation 2-47 The differential unit shown in Figure 2-17 has two ports (Table 2-18). A single-ended version has four ports. 1 2 1 Figure 2-17. Data unit rear view Table 2-18 Data Unit Rear View Figure Legend 1 2 Description Power connector Expansion unit interface SHR-1683 Integral Fan - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 81
2-48 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Library Robotics The DLT MiniLibrary system features library robotics that can load any of the cartridges stored in any magazine in the system into any - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 82
3 Chapter Installation Introduction This chapter describes the complete MiniLibrary system installation process, from planning and parts identification to mechanical installation, cabling, and configuration. Installation Overview There are three basic areas for installing a MiniLibrary System: - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 83
3-2 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Cabling consists of: I Interconnecting the Data Units and MiniLibrary Base Modules with the Expansion Unit I Connecting the Expansion Unit to the PTM motor I Connecting the - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 84
Installation 3-3 Positioning the Modules The Expansion Unit must be mounted at the top of the stack, which places its control panel at a convenient height. The control panels of the Data Unit MiniLibrary Base Modules are of secondary importance, as they serve mainly to help localize system failures. - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 85
/TL891 Family MiniLibrary System Reference Guide 5 4 1 2 6 4 5 4 3 6 Figure 3-1. PTM external parts Figure Legend 1 2 3 4 5 6 Table 3-1 PTM External Parts Description Motor drive section Extension sections Pass-through base with idler pulley Tie bars Support brace Angle brackets SHR-1701 - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 86
Installation 3-5 Follow the instructions in the section "Mechanical Installation of the Expansion and Base Modules." After the rack slides and the Base Modules are in place, and after the PTM is assembled, you will install the PTM in the rack by attaching the support braces to the rear of the outer - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 87
3-6 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide 1 2 Figure 3-3. Car rear view showing belt block SHR-1703 Table 3-2 Car Rear View Showing Belt Block Figure Legends 1 2 Description Belt block Captive screws The belt - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 88
mounted between the motor drive section and the base section. All sections are joined together with tie bars. For systems up to four modules, two support braces are needed: one attached to the motor drive and one to the base section. For larger systems, a third - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 89
3-8 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Figure Legend 1 2 3 4 5 Table 3-3 PTM Assembled Description Support brace Motor drive section Extension section Tie bar Base section Preparing to Assemble the PTM You will need a clean, flat work area such as a table - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 90
4. Insert two M4 x 20 mm Phillips sems screws through the holes in the support brace into the holes in the base section, and tighten. 5. Place pairs of while you are connecting the motor drive section. 10. Center one of the support bars across the rear of the motor drive section over the holes on the - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 91
3-10 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Installing the Belt 1. Turn the assembled PTM over so that the motor points upward (see Figures 3-5 through 3-9). 2. Locate the tensioner ramp in the base section. - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 92
Installation 3-11 Table 3-4 Belt Length for Various System Sizes Number of Modules 2 3 4 5 6 Length of Belt 27 in (68 cm) 41 in (104 cm) 55 in (140 cm) 69 in (175 cm) 83 in (211 cm) 4. See Table 3-4 for the required belt length for your system. After verifying the length specified, cut the belt - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 93
3-12 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide 7. Thread the belt from the motor drive counter-clockwise around the idler pulley and back to the right end (Figure 3-5). 8. Holding the ends of the - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 94
2 1 Installation 3-13 3 Figure 3-8. Belt block with belt in place SHR-1708 Table 3-5 Belt Block with Belt in Place Figure Legend 1 2 3 Description Belt Gap visible Block 10. Tighten the four screws that hold the belt retaining plates. 11. Pull out the paper clip previously installed in the - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 95
3-14 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide 2 1 Figure 3-9. Aligning the captive screws with the block SHR-1709 Table 3-6 Aligning the Captive Screws with the Block Figure Legend 1 2 Description Press down Captive screws - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 96
Installation 3-15 17. While continuing to press the belt block against the back of the track, begin to tighten the captive screws. When both screws are partially threaded into the belt block, release the belt and finish tightening the screws. Be sure that the block is fully seated against the - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 97
StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide 6. Turn the PTM over and support it so that neither the motor nor section describes how to separate the rail slides, followed by the rackmount instructions. Follow the directions in the shipping container to unpack the module(s). Save - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 98
Installation 3-17 Rail Slide Separation 1. See Figure 3-10 and Table 3-7. Separate the inner rail slide from the middle and outer rail slides. 3 2 5 4 1 5 4 Figure 3-10. Separating the rail slides SHR-1710 Figure Legend 1 2 3 4 5 Table 3-7 Separating a Rack Slide Description Inner rail slide - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 99
3-18 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide 2. Identify and orient the parts of the rail slides and hardware needed for your rack. Figure 3-10 shows the parts required for standard rackmounting. NOTES: - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 100
Figure 3-11. SHR-1714 Figure 3-11. Installing the PTM in the rack 2. Position the PTM against the back of the installed modules so that the support braces rest on the previously installed angle brackets (Figure 3-11). Install a screw and washer through the rear hole in each angle bracket into the - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 101
3-20 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide 5. Repeat steps 3 and 4 at the bottom module. Tighten all screws that hold the PTM to the angle brackets while ensuring that: a. The PTM is centered - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 102
Installation 3-21 1 5 4 3 2 SHR-1715 Figure 3-12. Expansion unit SCSI connectors and cables (fast wide SCSI shown) Table 3-8 Expansion Unit SCSI connectors and Cables (Fast Wide SCSI Shown) Figure Legend 1 2 3 4 5 Description Pass-through motor cable connector Power cable Robotics cables to - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 103
3-22 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Control Cables Connect each MiniLibrary Base Module or Data Unit to the Expansion Unit using one of the cables with a DB-9 male connector at the - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 104
for each drive or each pair of drives. No more than two drives should be connected to a single SCSI bus. Your Technical Support representative is available to answer your questions about installation procedures for specific host systems. Before cabling the system, see the recommended SCSI cable - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 105
3-24 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Interface Cable Specifications The MiniLibrary is a high-performance system. To avoid degradation of performance, use the highest-quality interface cables. The detailed requirements for SCSI - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 106
Installation 3-25 I Expansion unit: 32 in (81 cm) I Cables of different types or impedance should not be used together. Additional specifications to assure the highest SCSI performance can be found in ANSI X3.131-1994 or later. NOTE: This equipment has been tested for electromagnetic emissions and - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 107
3-26 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide 7. Measure the cable length to connect the module to the computer system. 8. Be sure that the length of the entire bus falls below the maximum - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 108
Installation 3-27 Table 3-9 Base Module SCSI Connectors, Terminators, and Cables Figure Legend 1 2 3 4 5 6 7 8 9 : Description SCSI terminator DLT0 DLT1 Expansion unit interface Power connector Power cable Fan SCSI cables SCSI interface Library connectors (not used in slave mode) - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 109
3-28 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide 1 11 2 3 10 9 7 8 4 5 6 SHR-1717 Figure 3-14. Base module SCSI connectors, terminator, jumpers, and cables (SCSI-2 interface, daisy-chained connection shown) - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 110
as described in the next section. In addition, the MiniLibrary system is designed with several configuration options, each offering multiple settings to support a variety of applications and platforms. The setting of each option is stored in non-volatile memory in the module. For most applications - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 111
3-30 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Setting MiniLibrary Base Module (Slave) Configuration IMPORTANT: All MiniLibrary Base Modules are shipped configured as stand-alone systems. Before powering up the Expansion Unit in a - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 112
Installation 3-31 6. Press the button repeatedly to scroll down to select Alternate Config screen: Unit Attn. Report: *All: Alternate Config: *Standalone 7. Press the Enter and then button to change the line to Slave. Press the Enter button again and after selection stops flashing. The following - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 113
3-32 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide 3. Press the button three times to move the to Configure menu, then press the Enter button. The display shows the following Configure submenu screen. Note - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 114
Installation 3-33 6. With the next to line 1, press the Enter button. The moves to line 2 and the remains at the end of line 4, and an appears at the end of line 1. Now you can use the and buttons to scroll through the possible settings. Scroll downward so that 3 is displayed, then press the Enter - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 115
3-34 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide 3. With the next to line 1, press the Enter button. The moves to line 2 and appears at the end of line 4. Now you can use the - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 116
Installation 3-35 3. With the next to line 1, press the Enter button. The moves to line 2, a appears at the end of line 4, and a appears at the end of line 1. Now you can use the and buttons to scroll line 2 to specify the number of slots to be reserved. Scroll to the desired number, then press the - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 117
3-36 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Table 3-11 MiniLibrary Configuration Options continued Option Setting Set Library Mode (1) Library Mode: *Random Sequential DLT 0 Sequential DLT 1 Sequential Split Set Element Base Set Identification - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 118
Table 3-11 MiniLibrary Configuration Options continued Option Setting Set Time Hour: HH Minute: MM Set Baud Rate Baud Rate: *38,400 Auto 2,400 9,600 19,200 38,400 57,600 115,200 Set serial number Serial number field Set Unload Mode Unload Mode: *Implicit Explicit Set Auto Clean Mode Auto - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 119
3-38 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide The items available on the Configuration menu are: 1. Set Data Format: This setting lets you: a. Set the data format to Auto Selection, THZ01, THZ02, DLT2000, - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 120
Installation 3-39 4. Set Element Base: This setting lets you set the base addresses of each of the four SCSI elements of the module. In order to identify sources and destinations in commands to the robotics, the MiniLibrary System is divided into elements, each of which is assigned a separate - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 121
40 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide 10. Set Negotiation Mode: This option offers two in Tables 3-11 and 3-12 represent the version of the firmware in use when this manual was written. If the displays on your control panel differ from those described here, you - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 122
Installation 3-41 Table 3-12 MiniLibrary Special Configuration Options Set Special Configuration Option Mode Page 1F Length Settings Short (0 x 0E) Default Short (0 x 0E) Model Number Long (0 x 12 Compaq TL89X Compaq TL89X TUR Reporting Standard Custom Init. Element Status - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 123
3-42 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Table 3-12 MiniLibrary Special Configuration Options continued Set Special Configuration Settings Option Set Special Configuration Option Settings Door Open Response (Expansion Unit ) Ready Not Ready - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 124
you need to change the configuration, go on to the next section. If you are uncertain whether you need to change a setting, contact your Technical Support representative. To change settings, you need to use the control panel. For an overview of how the control panel works, and a description of the - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 125
4-2 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Customizing Your Configuration To customize your configuration: 1. Turn the Base Module on, and wait until the POST terminates and the following Default screen appears. Yours - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 126
Configuration 4-3 5. Press the Enter button to select DLT0, or, to select DLT1, press the button to move the next to DLT1, then press the Enter button. The following submenu for the Set Data Format option appears: DLT1 Density: *Auto. Selection DLT1 Compression: *Disable As the submenu shows, the - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 127
4-4 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Descriptions of Configuration Options The items available on the Configuration menu follow. Set Data Format This setting lets you: 1. Set the data format to Auto - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 128
Configuration 4-5 Set Library Mode This option lets you set the MiniLibrary system robotics operating mode to Random, Sequential DLT0, Sequential DLT1, or Sequential Split. Random is the normal operating mode which affords complete host control of the MiniLibrary system robotics. The Sequential - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 129
4-6 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide 3. Press the twice so that the is next to Set Library Mode and then press the Enter button. The following Library Mode Selection menu appears: - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 130
Configuration 4-7 The following Special Config submenu appears: Mode Pg 1F Length * Short (0x0E) Model Number * Compaq TL89X Press twice to position the next to the TUR Reporting option. Press the Enter button to move down one line to *Standard. Use the to change to Custom and press the Enter button - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 131
System Reference Guide Set Date This command lets you set the Base Module calendar. Tables 4-1 and 4-2 list the configuration settings for the MiniLibrary system Base Module. NOTE: The options described in Table 4-1 and Table 4-2 represent the version of the firmware in use when this manual was - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 132
Configuration 4-9 Table 4-1 MiniLibrary Configuration Options Option Set Data Format Setting DLT n Density: * Auto Selection THZ01 THZ02 DLT2000 DLT2000XT DLT4000 DLT7000 DLT8000 Set SCSI DLT n Compression: * Auto Selection On Off Library Parity: *Enabled Disabled Library Bus ID: *0 0-15 DLT0 - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 133
4-10 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Table 4-1 MiniLibrary Configuration Options continued Option Setting Set Library Mode (1) Library Mode: *Random Sequential DLT 0 Sequential DLT 1 Sequential Split Set Element Base Set Identification If - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 134
Configuration 4-11 Table 4-1 MiniLibrary Configuration Options continued Option Setting Set Time Hour: HH Minute: MM Set Baud Rate Baud Rate: *38,400 Auto 2,400 9,600 19,200 38,400 57,600 115,200 Set serial number Serial number field Set Unload Mode Unload Mode: *Implicit Explicit Set - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 135
4-12 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Table 4-2 MiniLibrary Special Configuration Options Set Special Configuration Option Mode Page 1F Length Settings Short (0 x 0E) Default Short (0 x 0E) Model Number Long (0 x 12 Compaq TL89X - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 136
Configuration 4-13 Table 4-2 MiniLibrary Special Configuration Options continued Set Special Configuration Settings Option Set Special Configuration Option Settings Door Open Response (Expansion Unit ) Ready Not Ready SCSI Mode SCSI-2 SCSI-3 Post Recv'd Error Disabled Enabled Tape Alert - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 137
4-14 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Set Unload Mode This option determines whether a SCSI MOVE MEDIUM command is interpreted as implicit or explicit. If implicit, when the Base Module receives a SCSI - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 138
Configuration 4-15 Set Reserve Slot Some host software imposes size limits on tape library magazines for licensing purposes, and will not operate with a MiniLibrary system that exceeds the licensed size. This configuration option lets you withdraw some of the slots in the Expansion Unit from use as - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 139
Update I NOVRAM Update I Clock Update I Flash DLT I Reboot Module Of these, only Clean Drive and the Demo Menu are intended for you to use. Service personnel can perform Flash Update. NOVRAM Update and Clock Update are used in factory setup, however, these functions are duplicated by the options on - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 140
StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide A diagnostic diskette (Microsoft Windows NT and Diagnostic menu and the Demo menu are described in Chapter 6, "Diagnostics and Troubleshooting." Cleaning Cartridge The cleaning cartridge is similar in appearance to the data cartridge - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 141
Regular Maintenance 5-3 Running the Cleaning Cartridge This procedure assumes that the cleaning cartridge has been installed into Slot 0 of the magazine. 1. At the Default screen, press the Enter button. The following screen appears: Load/Unload Show Status Menu Maintenance Menu Configure Menu 2. - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 142
5-4 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide When you press the Enter button, The following screen appears: Clean: DLT0 Use: Slot0 Cleaning In Progress When the cleaning operation completes, the Default screen - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 143
Chapter Diagnostics and Troubleshooting Introduction This chapter describes the procedures for diagnosing platform problems and drive errors is available for each FSC as described in this chapter. Platform Problems Platform errors typically arise out of incorrect installation and configuration. The - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 144
Reference Guide General Drive Errors These errors usually result from a miscommunication between the drive processors or involve a mechanical malfunction. In most cases, these types of errors report an error message and an FSC to the control panel. The only exceptions are power supply problems and - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 145
on the control panel Find FSC in Table 6-2 Check configuration in Ch. 4 Follow the ERP in Table 6-1 Call Technical Support Call Technical Support CARTRIDGE ERROR FSC might/might not be displayed Cartridge will not eject Normal operation impossible Figure 6-1. Troubleshooting flowchart SHR-1718 - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 146
Guide Error Recovery Procedures Table 6-1 lists error recovery instructions for errors reported on the front panel. This list includes procedures that should only be performed by a qualified service Support about a fault condition, be sure to furnish the FSC to aid in identifying the problem. - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 147
Diagnostics and Troubleshooting 6-5 Table 6-2 System Error Codes (0xxx) FSC Message Description 0101 Unused A checksum error was detected while reading the NOVRAM. 0303 Novram Program Error A problem was detected while trying to update the NOVRAM. 0304 Novram Downld Error An error - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 148
6-6 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Table 6-2 System Error Codes (0xxx) continued FSC Message 0701 Slv Comm Open Error 0801 Not In Br. Menu Mode 0802 Invalid Novram Upd. 0803 Executing - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 149
Diagnostics and Troubleshooting 6-7 Table 6-3 SCSI Error Codes (1xxx) continued FSC Message 1022 SCSI Invalid Semaphore 1023 SCSI Invalid State 1024 SCSI Invalid Ctl Msg 1025 Overlapped Ctl Cmds - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 150
6-8 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Table 6-4 Control Error Codes (2xxx) continued FSC Message 2008 Illegal Move 2009 Door Open 200A Menu Mode 200C Cart Unaccessible 200D Drive In Error 200E - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 151
Free Queues 206x Calib. Error Port x 206f Pass-thru Init Error 2070 Command Timeout 2071 Command Timeout 2072 Command Timeout Diagnostics and Troubleshooting 6-9 Description During power up, communication with one of the DLT drives was unsuccessful. While trying to update the front panel - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 152
6-10 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Table 6-4 Control Error Codes (2xxx) continued FSC Message 2073 Drive Config Error 2074 Stow Error 2075 Fetch Error Description Set if the Alternate Unload has - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 153
Diagnostics and Troubleshooting 6-11 Table 6-5 Motor Process Error Codes (3xxx) continued FSC Picker Jammed Description Open Tach detected on picker motor. Open Tach detected on door motor. A problem was encountered while trying to stow a cartridge to a drive. Couldn't close the door. Check - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 154
6-12 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Table 6-5 Motor Process Error Codes (3xxx) continued FSC Message 3103 Picker Jammed 3104 Picker Jammed 3105 Picker Jammed 3106 Picker Jammed 3107 Picker Jammed 3108 - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 155
Diagnostics and Troubleshooting 6-13 Table 6-6 Power-On Error Codes (4xxx) FSC Message Description 4001 ROM CRC Error 4002 Ram Test Failed You chose the Load/Unload menu selection, - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 156
6-14 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Table 6-7 Power-On Error Codes (5xxx) continued FSC Message 5004 No Slots Installed 5010 No DLTs Attached 5011 All Slots Empty 5012 All DLTs Full - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 157
DLT Set Bus ID Error 5038 SCSI Lock Overrides 5039 Invalid Unlock Code 503A Auto Cleaning 5090 Slave Command Failure Diagnostics and Troubleshooting 6-15 Description A time or date setting obtained from the real-time clock, which was indicated as being running, nevertheless was determined - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 158
6-16 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Table 6-8 Intermodule Error Codes (6xxx) FSC Message Description 6001 Comm Open Error An attempt to open the RS-232 serial communication port used by the - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 159
Diagnostics and Troubleshooting 6-17 Table 6-8 Intermodule Error Codes (6xxx) continued FSC Message 6015 Ack Timeout - Out 6016 Ack Timeout - In 6017 Ack Invalid - Out 6018 Ack Invalid - In - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 160
6-18 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Table 6-8 Intermodule Error Codes (6xxx) continued FSC Message 6024 Slave Has No Pkts 6025 Pkt ID Invalid 6026 No Slaves to Flash 6027 Master Has - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 161
Diagnostics and Troubleshooting 6-19 Table 6-8 Intermodule Error Codes (6xxx) continued FSC Message 6044 Invalid Com Blk Type 6045 Command Overlap 6046 No Pkts To Send 6047 Invalid Direction - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 162
6-20 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Table 6-9 Boot Error Codes (Bxxx) continued FSC Message B010 Boot UART 0 Error B011 Boot UART 1 Error B012 Boot UART 2 Error B013 Boot UART 3 Error B014 - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 163
Diagnostics and Troubleshooting 6-21 Using System Diagnostics The system diagnostics are intended to be used by a CE or other technically trained person. To use system diagnostics: 1. At the - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 164
6-22 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Cartridge Cycle Diagnostic When you select Cartridge Cycle, the MiniLibrary system robotics begin to move cartridges randomly from slot to slot in the magazine, while - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 165
A Appendix Specifications Introduction This appendix lists the specifications and regulatory requirements met by the MiniLibrary system, Expansion Unit, Data Unit, and MiniLibrary Base Module(s). Table A-1 Operational Performance Specifications Description Host Interface Number of cartridges, - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 166
A-2 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Table A-1 Operational Performance Specifications continued Description Specification Tape speed DLT20/40 DLT35/70 DLT40/80 110 in/s read/write, 150 in/s search 160 in/s read/ - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 167
Specifications A-3 Table A-2 Reliability Specifications (Drives) Description Mean cycles between operator intervention Data error rate (recoverable) MTBF MTTR Head life Design life Specification 150,000 1 in 1017 bits 250,000 hr (unlimited duty cycle) 15 min 50,000 tape motion hrs 7 yrs @ 3,300 - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 168
A-4 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Table A-5 Mechanical Specifications Description Height Width Depth: Overall Behind panel Weight: MiniLibrary system Base Module: Dual-drive Single-drive Expansion unit Data unit Pass-through - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 169
Specifications A-5 Table A-7 Environmental Specifications (Packed or Unpacked) Description Dry bulb temperature Temperature gradient Temperature shock Wet bulb temperature Relative humidity (non-condensing) Humidity gradient Altitude Specification 41°F to 104°F (5°C to 40°C) 36°F (20°C)/hr ( - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 170
MiniLibrary System Reference Guide Safety The MiniLibrary Base Module, Expansion Unit, and Data Unit carry the following Regulatory Agency product safety certifications. Table A-10 Regulator Agency Product Safety Certifications Description Certification UL Listed TUV/Product Service GS Mark CE - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 171
. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 172
A-8 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Acoustic Noise Declaration Table A-11 Acoustic Noise Declaration Declared per ISO 9296 and ISO 7779 Product TL881/TL891 Family MiniLibrary System Sound Power Level L B W Ad, - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 173
operation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 174
A-10 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Equipment Meeting VDE Class B Requirements (VFG 1046/84 and VFG 243/91 for Germany) Für Bundesrepublik Deutschland For Federal Republic of Germany Pour la République féderal d' - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 175
used in a residential area or in an area adjacent thereto, radio interference may be caused to radios and TV receivers, and so on. Read the instructions for correct handling. - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 176
can order additional CompacTape Data or Cleaning Cartridges for the TL881/TL891Family MiniLibrary System by contacting your authorized Compaq reseller or by calling Compaq ordering service at 1-800-345-1518. Table B-1 lists cartridge ordering part numbers. - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 177
B-2 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide New Part Number 199702-001 242465-001 295194-B21 295195-B22 199704-001 199680-002 Table B-1 Data and Cleaning Cartridge Part Numbers Old Part Number - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 178
C Appendix Product Notes for Microsoft Windows NT and Novell Netware Introduction This appendix provides information for the system administrator who should read this appendix before installing and using DLT tape drives with a host system operating under the Windows NT or Novell NetWare operating - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 179
StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Host SCSI Interface Compaq has tested and supports DLT tape drives under the Windows NT Additionally, Compaq publishes a list of commercial software products that support DLT tape drives. When choosing a software product to operate - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 180
D Appendix Adding a Second Tape Drive Introduction This appendix explains how to add a second tape drive to the TL881/TL891 Family MiniLibrary System. IMPORTANT: All screws that do not use lock washers, captive washers or lock nuts must have Loctite 222 applied when parts are reassembled in the - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 181
D-2 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Parts Location Figure D-1 shows the location of most of the field-replaceable parts. 5 6 4 3 2 1 7 14 13 12 11 10 Figure D-1. Parts location 8 9 SHR-1719 Figure Legend 1 2 3 4 5 6 7 8 9 - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 182
part of an expanded TL881/TL981 Family MiniLibrary System, refer to the Compaq StorageWorks TL881/TL890/TL891 Family MiniLibrary System Maintenance and Service Guide for information on removing the Base Module from the MiniLibrary system. To add a second drive to the Base Module: 1. Remove the skin - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 183
D-4 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Removing and Replacing the Skin Cover (Desktop Models Only) The skin cover is held in place by two screws on each side of the Base - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 184
Adding a Second Tape Driv D-5 Replacing To replace the skin cover on the Base Module: 1. Slide the skin cover over the module until it touches the front panel. 2. Insert the four screws (2 each side) through the skin cover into the Base Module. Do not tighten the screws yet. 3. Position the front - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 185
D-6 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide 4. Connect the power and interface cables at the rear of the module. 5. If the Base Module is a desktop model, replace the skin cover as described - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 186
Adding a Second Tape Driv D-7 Removing Remove the drive caddy assembly from the Base Module: 1. Remove the cover plate as described in "Removing and Replacing the Cover Plate." 2. Disconnect the SCSI cable connectors ( 1 Figure D-4) from the controller SCSI extension cable. 5 7 2 7 1 5 3 6 - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 187
D-8 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide 3. Disconnect the drive power Y cable 2 from the power supply connector. 4. Disconnect the drive 1 RS-422 cable 3 from the controller PWB end. 5. Remove two M4 x 8 mm - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 188
Adding a Second Tape Driv D-9 5. Connect the drive power cable 2 to the power supply connector. 6. Connect the SCSI cable connectors 1 to the controller SCSI extension cable. 7. Replace the cover plate as described in "Removing and Replacing the Cover Plate." Installing the Second Tape Drive To - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 189
D-10 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide 9. Install the RS-422 cable supplied with the kit, sliding it under the clamps so that the connector is adjacent to the connector on top - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 190
supplements the information presented in the section "Mechanical Installation" of Chapter 3. IMPORTANT: These procedures should be performed by a qualified service technician. Pass-Through Section Covers The Pass-Through Mechanism (PTM) moves tape cartridges vertically between the TL881/TL891 Family - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 191
E-2 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide IMPORTANT: Both parts of the covers must remain in place over any section of the mechanism that is not behind a MiniLibrary system module. Any gaps - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 192
F Appendix Tape Drives and Cartridges Introduction This appendix discusses: I Care and handling of cartridges I Preparing cartridges for use I Adding and removing cartridges through the load port I Adding and removing cartridges through the storage array door I Using the tape drives I Removing - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 193
F-2 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Care and Handling of Cartridges CompacTape is a Digital Linear Tape (DLT) that has been designed and formulated for use in DLT tape drives and tape - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 194
Tape Drives and Cartridges F-3 I The ambient operating environment for the tape cartridge is: Temperature: 50°F to 104°F (10°C to 40°C) Relative Humidity: 20% to 80% (non-condensing) If storage and/or transportation of a tape cartridge has exposed it to conditions outside the ambient values - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 195
F-4 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide 1 Figure F-1. Opening the cartridge door 2 SHR-1725 Table F-1 Opening the Cartridge Door Figure Legend 1 2 Description Slide lever Cartridge (takeup) leader 4. Verify that the cartridge (takeup) - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 196
1 2 3 4 7 5 Tape Drives and Cartridges F-5 6 8 SHR-1726 Figure F-2. Correct and incorrect cartridge (takeup) leader positions Table F-2 Opening the Cartridge Door Figure Legend 1 2 3 4 5 6 7 8 Description Acceptable Buckling link Takeup leader Not Acceptable Buckling link hook Buckling link - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 197
F-6 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide 5. Verify that the two reel lock levers are in position: one is located on the same surface as the cartridge leader door, the other is - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 198
Tape Drives and Cartridges F-7 Transportation Guidelines Keep within the following environmental guidelines as listed in Tables F-3 and F-4. Table F-3 Unrecorded (Blank) Cartridges Description Temperature Relative humidity Wet bulb temperature Duration Specification -10°F to 118°F (-23°C to 48 - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 199
/TL891 Family MiniLibrary System Reference Guide I Condition newly received cartridges Cleaning Guidelines See the following guidelines and Table F-5 for instructions on using the cleaning cartridge to clean the tape drive If the problem persists after two cleanings, contact Compaq for service. - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 200
cartridge. Cause The drive heads need cleaning or the tape is defective. The data cartridge might be defective. Your data cartridge might be the problem. Cleaning has not been done. The cleaning cartridge might have expired. Solution Try another tape. Use the cleaning cartridge if the LED stays on - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 201
StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Cleaning the Tape Drive Heads The tape drive cycle can take five minutes if the cleaning tape is near the end of its 20-pass service life. When the cleaning cartridge has completed this task, the green Operate Handle LED lights. 4. - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 202
Tape Drives and Cartridges F-11 Preparing Cartridges for Use The MiniLibrary system comes with one DLT tape cartridge and one cleaning cartridge. IMPORTANT: The MiniLibrary system accepts only CompacTape III, CompacTape IIIXT, and CompacTape IV cartridges. For best performance, use CompacTape IV - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 203
F-12 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide 1 Figure F-3. Applying a bar code label SHR-1727 - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 204
Tape Drives and Cartridges F-13 Write-Protecting and Write-Enabling Cartridges Each DLT cartridge has a write-protect switch 1 and an orange protection tab 2. Use the switch as follows: 1. To write-protect a cartridge (prevent data from being written onto the tape), move the switch to the left. The - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 205
14 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Using the Tape Drives Each tape drive has a CAUTION: To reduce the risk of damaging data on the tape cartridges, do not attempt to manually change the tape density using the controls on the left side of the control panel. To - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 206
Tape Drives and Cartridges F-15 Figure Legend 1 2 3 4 5 Table F-7 Tape Drive Control Panel Name Function Write Protect indicator (orange) Tape in Use Indicator (yellow) Use Cleaning Tape Indicator (yellow) Operate Handle indicator (green) Unload button Lights when the loaded tape cartridge is - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 207
0,050 92 mm2 (30 AWG) NOTE: 1. SE 6 m cable applies to SCSI devices running at or below fast-5 data transfer rates. 2. For interconnects supporting LVD/SE multimode, the larger conductor size should be used. 3. The conductor size recommendations assume voltage drops only due to the cables (that is - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 208
Index A Accessories B-1 Adding a Second Drive overall procedure D-3 Adding to an Existing Pass- Through Mechanism 3-15 Advanced Design Features 1-14 Archival Guidelines F-6 Assembling the Pass-Through Mechanism 3-8 B Bar Code Label and Magazine Ordering Information B-2 Bar Code Reader 1-14, 2-38, - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 209
2 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Compression 1-15 data 1-15 Configuration 2-40, 2-45, 3-2, 3-29 2-13 Demo Submenu 6-22 Descriptions of Configuration Options 3-35 Diagnosing Problems 6-1 Display 1-13, 2-46 Display Messages 2-12 Displaying Error Logs - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 210
G General Drive Errors 6-2 Getting Help xvi H Help additional sources xvi Compaq authorized resellers, telephone numbers xvii Compaq website xvii technical support telephone numbers xvi Host SCSI Interface C-2 http://www.compaq.com xvii I Icons symbols on equipment xiv Identifying the Parts of the - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 211
Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Menus configure 2-22 drive status 2-20 library status Mechanism Motor Cable 3-21 Physical Configuration 1-8 Planning Your Installation 3-2 Platform Problems 6-1 Positioning the Modules 3-3 Power Cord 3-22 Power Supply 1-13, - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 212
-Top Configuration 2-40 Tape Cartridge Magazines 1-13 described 2-46 Tape Drive adding a second D-1 Tape Requirements 2-34 Technical Support xvi Telephone Numbers xvii Ten-Cartridge Magazine illustrated 1-9 Terminator Installation 3-25 Text Conventions xiii Troubleshooting Flowchart illustrated 6-3 - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 213
6 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide U Using CE Diagnostics 6-21 Using the Demo Submenu 6-22 Using the Tape Drives F-14 V VCCI Notice for Japan Class I Equipment A-11 Voltage Ranges 2-46 W Warnings
TL881/TL891 Family
MiniLibrary System
Reference Guide
Second Edition (July 2000)
Part Number 127510-002
Compaq Computer Corporation