HP SW TL881 DLT Mini-Lib/1 Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 164
Cartridge Cycle Diagnostic, Using the Demo Submenu
View all HP SW TL881 DLT Mini-Lib/1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
6-22 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide Cartridge Cycle Diagnostic When you select Cartridge Cycle, the MiniLibrary system robotics begin to move cartridges randomly from slot to slot in the magazine, while reporting on the front panel the number of passes. This diagnostic runs continuously as long as the Base Module has power. To stop the test, press the Escape button. A flashing message appears on the display telling you that the test is paused. Pressing the Escape button a second time terminates the diagnostic and returns to the Maintenance menu. Using the Demo Submenu The only user diagnostic is found on the Demo submenu on the Maintenance menu. The submenu lists five demos, numbered 1 through 5. At present, only Demo 1 is implemented. Demo 1 lets you fully exercise the MiniLibrary system robotics. When you select Demo 1, the MiniLibrary system robotics begins to move cartridges randomly from slot to slot in the magazine, while reporting on the front panel the number of passes. If all 10 or 16 slots in the magazine are full, Demo 1 will load a cartridge into DLT0 and leave it there. If you press the button while Demo 1 is running, the MiniLibrary system will load a cartridge into DLT0, unless DLT0 is full. If you press the button again, the cartridge is unloaded from DLT0 and returned to the magazine. The button causes DLT1 to be loaded and unloaded in the same way. Demo 1 runs continuously as long as the Base Module has power. To stop the test, press the Escape button. A flashing message appears on the display telling you that the test is paused. Pressing the Escape button a second time terminates Demo 1 and returns to the Maintenance menu.