HP SW TL881 DLT Mini-Lib/1 Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 48

Operation 2-15 I Hard error I In flux I Fault The third line in a MiniLibrary Base Module tells the status of the library robotics (loader) within the MiniLibrary Base Module. The possible conditions of the library robotics are: I Idle I Fetch/stow I Taking inventory I Checking drives I Scanning labels I Orphaned cartridge I Trapped cartridge I Elevator home The fourth line in a Base Module is the magazine map. Numbers 16-25 represent the map numbers of the cartridge slots. In this case, a 10-slot magazine is in the first position below the 16-slot Expansion Unit. These numbers vary with the position of the module within the system and magazine size. If no magazine is installed, line 4 indicates "No Magazine." The boxes present on this line indicate that a cartridge is present in the corresponding slot of the magazine. An underline means that there is no cartridge present in that slot. Selecting Control Panel Display Modes As previously described, the POST, Initialization and Default screens appear without operator or host intervention. The Fault screens appear whenever a fault occurs. The screens that follow appear in response to operator actions.