HP SW TL881 DLT Mini-Lib/1 Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 130
Set Element Base, address assignment The defaults are transport = 0000h, storage element
View all HP SW TL881 DLT Mini-Lib/1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Configuration 4-7 The following Special Config submenu appears: Mode Pg 1F Length * Short (0x0E) Model Number * Compaq TL89X Press twice to position the next to the TUR Reporting option. Press the Enter button to move down one line to *Standard. Use the to change to Custom and press the Enter button to accept this setting. To return the Base Module to online status, press the Escape button three times. Set Element Base This option lets you set the base addresses of each of the three SCSI elements of the module. In order to identify sources and destinations in commands to the robotics, the Base Module is divided into elements, each of which is assigned a separate designator or element address. The transport element is the robotics mechanism itself; the storage elements are the 10 or 16 slots in the magazine; the transfer elements are the drives. The Base Module reports these settings in response to the SCSI MODE SENSE command, in the element address assignment page. The defaults are transport = 0000h, storage element base = 0001h, transfer element base = 00F0h.