HP Surestore E Tape Library Model 6/60 HP SureStore E Tape Library Models 2/20 - Page 88

NOTE NOTE Library Operations Drive and Tape Operations Drive and Tape Operations Main Menu -> Operations -> Drive and Tape Operations Look at the product information labels on the back of the library and the labels inside each tape door for more information about drive and slot numbering. The numbering scheme is also illustrated in "Front Panel Overview" on page 2-3 and "Library Back Panel" on page 1-24. The "Home" and "Map" front panel screens illustrate the drive, slot, and mailslot numbering schemes. Slot numbers displayed in reverse video indicate those reserved for the mailslot. Loading a Tape Into a Drive 1. From the Drive and Tape Operations menu, select Load Tape from Drive. 2. Use the [-] or [+] key to select any slot. Only full slots are available for selection. Select [OK]. 3. Use the [-] or [+] key to select the desired drive. You can only select empty drives that match the tape type. 4. Select [Load] to move the tape from a slot to a drive. A confirmation screen indicates that the tape is loaded. You can also load tapes into drives from remote access. See "Using the Remote Management Card" on page 3-9. 2-16 Chapter 2