HP T610 HP Designjet T610 Series - User's Guide - Page 104
CAUTION, display that the printhead has been inserted. If you have difficulty, see
UPC - 883585044344
View all HP T610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
3. Insert the new printhead into its correct slot in the carriage. CAUTION: Insert the printhead slowly and vertically, straight down. It may be damaged if you insert it too fast, or at an angle, or if you rotate it as you insert it. 4. Push down as indicated by the arrow shown below. CAUTION: When installing the new printhead there may be some resistance, so you need to press it down firmly but smoothly. You should hear a beep and see confirmation on the front-panel display that the printhead has been inserted. If you have difficulty, see Cannot insert a printhead on page 142. 5. Insert all other printheads that need to be installed, and close the carriage lid. Ink and printheads 94 Chapter 9 Handling ink cartridges and printheads ENWW
3.
Insert the new printhead into its correct slot in the carriage.
CAUTION:
Insert the printhead slowly and vertically, straight down. It may be damaged if you
insert it too fast, or at an angle, or if you rotate it as you insert it.
4.
Push down as indicated by the arrow shown below.
CAUTION:
When installing the new printhead there may be some resistance, so you need to
press it down firmly but smoothly. You should hear a beep and see confirmation on the front-panel
display that the printhead has been inserted. If you have difficulty, see
Cannot insert a printhead
on page
142
.
5.
Insert all other printheads that need to be installed, and close the carriage lid.
94
Chapter 9
Handling ink cartridges and printheads
ENWW
Ink and printheads