HP T610 HP Designjet T610 Series - User's Guide - Page 24

TCP/IP connection, Uninstall the printer software (Mac OS) - designjet network

Page 24 highlights

TCP/IP connection 1. Go to your printer's front panel and press the Menu key until you see the status screen. Installing the software Note the URL of your printer (http://XXXX11 in this example). 2. Insert the HP Start-Up Kit DVD into your DVD drive. 3. Open the DVD icon on your desktop. 4. Open the Mac OS X HP Designjet Installer icon. 5. Follow the instructions on your screen. You are recommended to use the Easy Install option. 6. The printer software is installed, including the printer driver, HP Printer Utility, and HP Color Center. NOTE: HP Printer Utility and HP Color Center cannot be used with a printer connected through an HP Jetdirect print server. 7. When the software has been installed, the HP Printer Setup Assistant starts automatically, to set up a connection to your printer. Follow the instructions on your screen. 8. When you reach the Select Printer screen, look for your printer's URL (which you noted in step 1) in the Printer Name column. ● If you find the right printer name, scroll sideways if necessary to see the Connection Type column, and check that it shows IP Printing. Then highlight that line. Otherwise, continue searching further down the list. ● If you cannot find your printer name with an IP Printing connection type, check the box My printer is not in the list. Click Continue. 9. Continue following the instructions on the screen. When you reach the Printer Queue Created screen, click Quit to exit, or Create New Queue if you want to connect another printer to the network. 10. When the HP Printer Setup Assistant has finished, you can remove the DVD from the DVD drive. If the printer driver is already installed, the HP Printer Setup Assistant can be run at any time from the DVD. Uninstall the printer software (Mac OS) 1. Insert the HP Start-Up Kit DVD into your DVD drive. 2. Open the DVD icon on your desktop. 14 Chapter 2 Installing the software ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181

TCP/IP connection
1.
Go to your printer's front panel and press the
Menu
key until you see the status screen.
Note the URL of your printer (http://XXXX11 in this example).
2.
Insert the
HP Start-Up Kit
DVD into your DVD drive.
3.
Open the DVD icon on your desktop.
4.
Open the
Mac OS X HP Designjet Installer
icon.
5.
Follow the instructions on your screen. You are recommended to use the
Easy Install
option.
6.
The printer software is installed, including the printer driver, HP Printer Utility, and HP Color Center.
NOTE:
HP Printer Utility and HP Color Center cannot be used with a printer connected through
an HP Jetdirect print server.
7.
When the software has been installed, the HP Printer Setup Assistant starts automatically, to set
up a connection to your printer. Follow the instructions on your screen.
8.
When you reach the Select Printer screen, look for your printer's URL (which you noted in step 1)
in the Printer Name column.
If you find the right printer name, scroll sideways if necessary to see the Connection Type
column, and check that it shows
IP Printing
. Then highlight that line. Otherwise, continue
searching further down the list.
If you cannot find your printer name with an
IP Printing
connection type, check the box
My
printer is not in the list
.
Click
Continue
.
9.
Continue following the instructions on the screen. When you reach the Printer Queue Created
screen, click
Quit
to exit, or
Create New Queue
if you want to connect another printer to the
network.
10.
When the HP Printer Setup Assistant has finished, you can remove the DVD from the DVD drive.
If the printer driver is already installed, the HP Printer Setup Assistant can be run at any time from the
DVD.
Uninstall the printer software (Mac OS)
1.
Insert the
HP Start-Up Kit
DVD into your DVD drive.
2.
Open the DVD icon on your desktop.
14
Chapter 2
Installing the software
ENWW
Installing the software