HP T610 HP Designjet T610 Series - User's Guide - Page 49

Paper menu procedure with paper on the roll, Roll out of paper procedure, Load a single sheet

Page 49 highlights

Paper menu procedure with paper on the roll If there is paper on the roll, you can also start the process from the paper menu in the front panel's main menu. 1. Press the Menu key to return to the main menu, select the Paper menu icon . 2. Select Unload paper. 3. Continue from step two of the Unload paper key process. Roll out of paper procedure If the end of the paper is no longer attached to the roll use the following procedure. 1. If you have already started the unload process, press the Cancel key on the front panel to cancel that procedure. 2. Lift the blue lever on the left. If the front panel displays a warning about the lever, ignore it. 3. Pull out the paper from the printer. Pull from wherever the paper is accessible; the back of the printer is recommended. 4. Lower the blue lever. 5. If the front panel displays a warning message, press the OK key to clear it. Load a single sheet There are two ways to load a sheet. The easy loading procedure is recommended. CAUTION: Any loaded roll or sheet must be unloaded before loading a sheet, see Unload a roll on page 38, and Unload a single sheet on page 42. CAUTION: For sheets thicker than 0.5mm, you must have space behind the printer equal to the length of the sheet. Paper handling ENWW Load a single sheet 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181

Paper menu procedure with paper on the roll
If there is paper on the roll, you can also start the process from the paper menu in the front panel's main
menu.
1.
Press the
Menu
key to return to the main menu, select the Paper menu icon
.
2.
Select
Unload paper
.
3.
Continue from step two of the
Unload paper
key process.
Roll out of paper procedure
If the end of the paper is no longer attached to the roll use the following procedure.
1.
If you have already started the unload process, press the
Cancel
key on the front panel to cancel
that procedure.
2.
Lift the blue lever on the left. If the front panel displays a warning about the lever, ignore it.
3.
Pull out the paper from the printer. Pull from wherever the paper is accessible; the back of the
printer is recommended.
4.
Lower the blue lever.
5.
If the front panel displays a warning message, press the
OK
key to clear it.
Load a single sheet
There are two ways to load a sheet. The easy loading procedure is recommended.
CAUTION:
Any loaded roll or sheet must be unloaded before loading a sheet, see
Unload a roll
on page
38
, and
Unload a single sheet
on page
42
.
CAUTION:
For sheets thicker than 0.5mm, you must have space behind the printer equal to the length
of the sheet.
ENWW
Load a single sheet
39
Paper handling