HP T610 HP Designjet T610 Series - User's Guide - Page 138
Lines are discontinuous
UPC - 883585044344
View all HP T610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
● The borders of colored blocks are wrongly colored. Print-quality issues To correct this kind of problem: 1. Reseat the printheads by removing them and then reinserting them. See Remove a printhead on page 90 and Insert a printhead on page 93. 2. Align the printheads. See Align the printheads on page 146. Lines are discontinuous If your lines are broken in the following way: 1. Check that you are using appropriate print-quality settings. See Printing on page 47. 2. Reseat the printheads by removing them and then reinserting them. See Remove a printhead on page 90 and Insert a printhead on page 93. 3. Align the printheads. See Align the printheads on page 146. 128 Chapter 13 Troubleshooting print-quality issues ENWW
●
The borders of colored blocks are wrongly colored.
To correct this kind of problem:
1.
Reseat the printheads by removing them and then reinserting them. See
Remove a printhead
on page
90
and
Insert a printhead
on page
93
.
2.
Align the printheads. See
Align the printheads
on page
146
.
Lines are discontinuous
If your lines are broken in the following way:
1.
Check that you are using appropriate print-quality settings. See
Printing
on page
47
.
2.
Reseat the printheads by removing them and then reinserting them. See
Remove a printhead
on page
90
and
Insert a printhead
on page
93
.
3.
Align the printheads. See
Align the printheads
on page
146
.
128
Chapter 13
Troubleshooting print-quality issues
ENWW
Print-quality issues