HP Tc2120 serhp server tc2120 operations and maintenance guide - english - Page 102
Heading2 - Removing Accessory Boards
UPC - 808736945332
View all HP Tc2120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Chapter 7 Removing Accessory Boards To remove an accessory board, refer to the following procedure: 1. If the server is operating, power off the server. Refer to Chapter 1, Controls and Indicators for instructions. 2. Disconnect the power cord and any external cables connected to the server. If necessary, label each one to expedite re-assembly. 3. Remove the left side cover. WARNING The power supply will continue to provide standby current to the hp server tc2120 until the power cord is disconnected from the AC power source. CAUTION Wear a wrist strap and use a static-dissipating work surface connected to the chassis when handling components. Ensure the metal of the wrist strap contacts your skin. 4. Lay the server on its side with the system board facing up (component side up). 5. Remove any cables attached to the accessory board. If necessary, label each one to expedite re-assembly of a replacement board. 6. Remove the slot cover latch by: a. Lift up on the tab of slot cover latch. a. Raise the slot cover latch up from the slot covers. a. Remove it from the chassis and keep it for reassembly. Replacing Parts 96