HP Tc2120 serhp server tc2120 operations and maintenance guide - english - Page 107
Heading2 - Replacing the Battery, Controls and Indicators
UPC - 808736945332
View all HP Tc2120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Chapter 7 3. Remove the cover. Replacing Parts WARNING The power supply will continue to provide standby current to the hp server until the power cord is disconnected from the AC power source. 4. Lay the server on its side (components showing) for better access to the battery, especially when it is released from the socket. 5. If necessary, remove any accessory boards or SCSI cables that prevent access to the battery socket. 6. Insert a small flat-blade screwdriver or similar tool between the battery and spring latch. See Figure 7-18. 7. Push the spring latch away from the battery to release it, and remove the battery. Figure 7-18. Removing the Battery Replacing the Battery 1. Insert the new battery with the positive sign (+) facing out, and ensure that it is seated completely. Ensure the retaining latch is in place, and holds the battery firmly. 2. If necessary, replace any accessory boards or SCSI cables removed to allow access to the battery socket. 3. Replace the left side cover. 4. Replace the external cables and power cord. 5. Power on the server as described in Chapter 1, Controls and Indicators. 6. Press F10 during the boot process to enter the (BIOS) Setup Utility and change the BIOS settings. 101