HP Tc2120 serhp server tc2120 operations and maintenance guide - english - Page 40
Heading2 - Replacing the Heat Sink and Cooling Fan, Replacing the Processor
UPC - 808736945332
View all HP Tc2120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Chapter 3 You should hear the ZIF lever click when it closes properly. Pin-1 Marker Installing and Configuring ZIF Lever Processor Socket Base Figure 3-17. Replacing the Processor Replacing the Heat Sink and Cooling Fan Once the processor is installed, the heat sink-cooling fan must be installed on top of the processor. The thermal patch on the bottom of the heat sink provides thermal bonding between the heat sink and processor. If the thermal patch on the old heat sink is damaged, you will need to install a new heat sink (a new heat sink comes with the thermal patch pre-applied). 1. Place the heat sink on top of the processor. 2. Hold the heat sink in place and close the latches to secure the heat sink to the bracket. Make sure the latches engages the hooks on the heat sink bracket. See Figure 3-18. 34