HP Tc2120 serhp server tc2120 operations and maintenance guide - english - Page 120
Heading1 - Power Supply Specifications, 128MB, 256MB, 512MB, or 1GB buffered, 184-pin
UPC - 808736945332
View all HP Tc2120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Chapter 9 Power Supply Specifications Parameter Input Type Input - Maximum Range Operating Current Inrush Current Operating Power Characteristics Manual voltage selection 100 to 127 VAC @ 50/60 Hz 200 to 240 VAC @ 50/60 Hz 100 to 127 VAC @ 7.0 A 200 to 240 VAC @ 3.5 A 90 A (cold) 120 A (warm) 250 W Continuous Hardware Specifications Specification Processors Chipset Memory Video SCSI IDE PCI Bus LAN Characteristics The hp server tc2120 supports the following processors: • Northwood Pentium 4 processors 2.4 GHz and above with 533 MHz FSB and 512KB L2 cache memory • Celeron processors 1.8GHz and above with 400MHz FSB and 128KB L2 cache memory ServerWorks Grand Champion SL chip set with 33 MHz PCI and 133 MHz FSB speed support Supports up to four ECC DDR DIMMS for a maximum total of 4.0 GB. Supported DIMM type and sizes: 128MB, 256MB, 512MB, or 1GB buffered, 184-pin, 3.3 volts, 72 bits wide, ECC single-bit correcting, multi-bit detecting. Embedded ATI Rage XL (8MB SDRAM) SCSI model only; single channel Ultra-160 SCSI cable (3 internal connectors), Ultra 160 SCSI LED cable Embedded Enhanced-IDE 33/66/100 dual-channel controller Five full-length 64-bit PCI slots at 33MHz. Four slots support 3.3 volt cards and 1 slot (blue connector) supports a +5 volt card. Embedded 10/100/1000 Broadcom 5702 LOM connection Specifications 114