HP Tc2120 serhp server tc2120 operations and maintenance guide - english - Page 41
Heading1 - Accessory Boards, Controls and Indicators, System Board Layout, Specifications
UPC - 808736945332
View all HP Tc2120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chapter 3 Installing and Configuring Latch Hook Hook Latch Figure 3-18. Replacing Heat Sink and Cooling Fan 3. Connect the heat sink cooling fan power cable to the fan connector on the system board. CAUTION Ensure that you connect the fan to the correct system board connector. If necessary, see "System Board Layout" in Chapter 9, Specifications. 4. Replace the left side cover. 5. Replace the external cables and power cord. 6. Power on the server as described in Chapter 1, Controls and Indicators. The BIOS automatically recognizes the new processor. Ensure that the latest version of BIOS is installed. To learn which version of BIOS is currently installed, press F10 during startup, and then select Summary from the list of options. To get the latest BIOS version for the hp server tc2120, connect to HP's support web site at: http://www.hp.com/ Accessory Boards The system board in the hp server tc2120 provides five PCI slots (P1 through P5), 64-bits at 33 MHz bus speed. Four of the slots support 3.3 volt cards; the fifth (blue) slot supports a +5 volt card. Some PCI slots may come with pre-installed boards. The SCSI model requires the first slot, (P1) for the SCSI controller board. 35