HP Tc2120 serhp server tc2120 operations and maintenance guide - english - Page 103
Heading2 - Replacing Accessory Boards, Removing Slot Cover Latch
UPC - 808736945332
View all HP Tc2120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Chapter 7 Replacing Parts You may need to lift the slot cover latch out of its retainer before lifting it out of the chassis. 1 2 3 Slot Cover Latch Latch Retainer Figure 7-14. Removing Slot Cover Latch 7. Lift the accessory board up and away from the slot. 8. Place the accessory board and any cables in an anti-static container. Replacing Accessory Boards 1. Read the documentation included with the accessory board and follow any special instructions. 2. If you are installing the accessory board into a new PCI slot, continue with Step 3. If the accessory board is a replacement for a defective board, skip to Step 5. 3. Remove the slot cover latch by: a. Lifting up on the tab of slot cover latch with your finger. b. Raise the slot cover latch up away from the slot covers. c. Remove it from the chassis and keep it for reassembly later. You may need to lift the slot cover latch out of its retainer before lifting it out of the chassis to remove the slot cover latch. 4. Select the desired accessory slot cover, slide the top of the slot cover away from the chassis, and then lift it up and out of the chassis as shown in the following illustration. 5. Slide the accessory board into the desired PCI slot and then press down to seat the board. 97