HP Tc2120 serhp server tc2120 operations and maintenance guide - english - Page 36
DIMM to Slot Alignment, DIMM Insertion, latches close. See
UPC - 808736945332
View all HP Tc2120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Chapter 3 Installing and Configuring 7. Spread the two retaining latches on the slot and align the notches on the DIMM with the keys on the slot. See Figure 3-13. Notches Keys Retaining Latches DIMM Slot Figure 3-13. DIMM to Slot Alignment 8. Holding the DIMM at 90 degrees to the system board, press the DIMM fully into the slot until the retaining latches close. See Figure 3-13. If the latches do not close, the DIMM is not inserted correctly. System Board 43 2 1 DIMM Slots Figure 3-14. DIMM Insertion 9. Repeat Steps 7-8 to install the remaining DIMMs of your memory configuration. 30
30
Chapter 3
Installing and Configuring
7.
Spread the two retaining latches on the slot and align the notches on the DIMM with the keys on the slot.
See
Figure 3-13
.
8.
Holding the DIMM at 90 degrees to the system board, press the DIMM fully into the slot until the retaining
latches close. See
Figure 3-13
.
If the latches do not close, the DIMM is not inserted correctly.
9.
Repeat Steps 7-8 to install the remaining DIMMs of your memory configuration.
Figure 3-13.
DIMM to Slot Alignment
Figure 3-14.
DIMM Insertion
Notches
DIMM Slot
Keys
Retaining
Latches
System Board
DIMM Slots
1
2
3
4