HP Tc2120 serhp server tc2120 operations and maintenance guide - english - Page 39

Heading2 - Replacing the Processor, Removing the Processor

Get HP Tc2120 - Server - 256 MB RAM PDF manuals and user guides
UPC - 808736945332
View all HP Tc2120 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Chapter 3 Installing and Configuring Pin-1 Marker ZIF Lever Processor Socket Base Figure 3-16. Removing the Processor 3. Grasp the processor by its edges and lift it out of the processor socket. 4. Place the processor on a static-dissipating work surface or into an anti-static bag. Replacing the Processor 1. Locate the pin-1 marker on the processor before installing the processor. 2. Open the ZIF lever to allow access to the processor socket. Pull the ZIF lever up and away from the ZIF socket and then raise it to a full 90° to the system board. 3. Align the processor over the empty processor socket. The socket has a mark for pin-1 that should match the mark for pin-1 on the processor near the end of the ZIF lever. CAUTION Ensure that you align pin-1 of the processor with pin-1 of the processor socket or pin damage will occur. 4. Insert the processor into the socket and close the ZIF lever to fully seat the processor. 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
33
Chapter 3
Installing and Configuring
3.
Grasp the processor by its edges and lift it out of the processor socket.
4.
Place the processor on a static-dissipating work surface or into an anti-static bag.
Replacing the Processor
1.
Locate the pin-1 marker on the processor before installing the processor.
2.
Open the ZIF lever to allow access to the processor socket.
Pull the ZIF lever up and away from the ZIF socket and then raise it to a full 90
°
to the system board.
3.
Align the processor over the empty processor socket.
The socket has a mark for pin-1 that should match the mark for pin-1 on the processor near the end of the
ZIF lever.
4.
Insert the processor into the socket and close the ZIF lever to fully seat the processor.
Figure 3-16.
Removing the Processor
CAUTION
Ensure that you align pin-1 of the processor with pin-1 of the
processor socket or pin damage will occur.
Pin-1 Marker
ZIF Lever
Processor
Socket Base