HP Tc2120 serhp server tc2120 operations and maintenance guide - english - Page 94

Heading2 - Replacing a Hard Disk Drive (Drive Cage Mounted),

Get HP Tc2120 - Server - 256 MB RAM PDF manuals and user guides
UPC - 808736945332
View all HP Tc2120 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 94 highlights

Chapter 7 6. Slide the drive out of the drive cage. Drive Slide Rails Retaining Clips Replacing Parts (Do not remove drive cage from chassis.) Figure 7-6. Releasing the Retaining Clips 7. Remove the four screws to remove the rails from the drive. 8. Place the removed drive in an anti-static bag for protection. Replacing a Hard Disk Drive (Drive Cage Mounted) NOTE If the hard disk drive (HDD) you are planning to install already has a mounting tray attached, you must remove it before you can install the drive into the drive cage. 1. Set the jumper on the back of the drive to "CS" (Cable Select). Refer to the hard disk drive documentation for detailed instructions. 2. Align and screw the rails to the new drive. Use the shoulder screws located above the drive cage. 88

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
88
Chapter 7
Replacing Parts
6.
Slide the drive out of the drive cage.
7.
Remove the four screws to remove the rails from the drive.
8.
Place the removed drive in an anti-static bag for protection.
Replacing a Hard Disk Drive (Drive Cage Mounted)
1.
Set the jumper on the back of the drive to “CS” (Cable Select). Refer to the hard disk drive documentation
for detailed instructions.
2.
Align and screw the rails to the new drive.
Use the shoulder screws located above the drive cage.
Figure 7-6.
Releasing the Retaining Clips
NOTE
If the hard disk drive (HDD) you are planning to install
already has a mounting tray attached, you must remove it
before you can install the drive into the drive cage.
Drive Slide Rails
Retaining Clips
(Do not remove
drive cage from
chassis.)