HP Xw8400 HP xw8400 Workstation - Service and Technical Reference Guide - Page 116
Log tab, Help tab, Diagnostic error codes - 6 beeps error code
UPC - 883585271085
View all HP Xw8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
● Individual test times ● Condition status of each test Log tab The Log tab consists of two views: Test Log-Displays all tests that have been executed, the number of times the test executed, the number of times the test failed, and the time it took to complete the test. Clicking the Clear Test Log button clears the contents of the Test Log. Error Log-Displays the tests that have failed during the diagnostic testing. Besides displaying the device and test, this section might also include error details. The description section describes the error that the diagnostic test found. Clicking the Recommended Repair button gives a recommended action that should be performed to resolve the failed hardware. Te error count is the number of times the test has failed. Clicking the Clear Error Log button clears the contents of the Error Log. Help tab The Help tab has three views: ● HP Insight Diagnostics-Provides introductory and detailed information about Insight Field Diagnostics. ● Error Codes-Provides error code listings. It includes device tested, message, and recommended repair information. ● Test Components-Reloads and refreshes all components and display component details after the refresh. The Help tab provides information option selections: ● Reload-Located in the upper-right corner of the display, this selection reloads all hardware components. ● About-Provides revision details of Insight Diagnostics. ● Exit-Located in the lower-left corner of the display, this selection provides the option to exit diagnostics. Diagnostic error codes This sections provides an overview of the diagnostic lights and error codes that are related to your workstation. Diagnostic light codes NOTE: The beeps are heard through the onboard piezo speaker and not the chassis speaker. The blinking LEDs and beeps repeat for five cycles. After that, only the blinking LEDs repeat. 106 Chapter 5 System diagnostics and troubleshooting ENWW