HP Xw8400 HP xw8400 Workstation - Service and Technical Reference Guide - Page 121
Solving power supply problems, Testing power supply
UPC - 883585271085
View all HP Xw8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Table 5-3 Minor problems (continued) Problem Cause Possible Solution ● If the power supply fan spins and the BIST* LED lights, then the power supply is good. Replace the system board. ● If the power supply fan does not spin or the BIST* LED does not light, replace the power supply. Solving power supply problems Testing power supply Before replacing the power supply, use the BIST feature to determine if the power supply still works. To test the power supply: 1. Disconnect AC power to the workstation. 2. Disconnect all internal power supply cables. 3. Plug in AC power. a. If the green BIST LED on the rear of the workstation is lit and the fan is spinning, the power supply is functional. b. If the green BIST LED is not lit or the fan is not spinning, replace the power supply. Figure 5-1 Power supply Table 5-4 Power supply problems Problem Cause Power supply shuts down intermittently. Power supply fault. Solution Replace the power supply. ENWW Troubleshooting scenarios and solutions 111