HP Xw8400 HP xw8400 Workstation - Service and Technical Reference Guide - Page 33
Computer Setup (F10) Utility menu, File>Default setup>Restore Factory Settings - release date
UPC - 883585271085
View all HP Xw8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
3. Select your language from the list, and press the Enter key. In the Computer Setup (F10) Utility menu, five headings are displayed: File, Storage, Security, Power, and Advanced. 4. Use the left and right arrow keys to select the appropriate heading. Use the up and down arrow keys to select the option you want, and press Enter. 5. To apply and save changes, select File>Save Changes and Exit. ● If you have made changes that you do not want applied, select File>Ignore Changes and Exit. ● To reset to factory settings, select File>Default setup>Restore Factory Settings as Default. Press F10 to accept the changes. Click Apply Defaults and Exit. This option restores the original factory system defaults. CAUTION: Do not turn the workstation power off while the ROM is saving your Computer Setup (F10) Utility changes because the CMOS could become corrupted. After you exit the F10 Setup screen, it is safe to remove all power from the workstation. Computer Setup (F10) Utility menu NOTE: The following content is subject to change with new BIOS releases, so your menu may be different than shown in Table 1-1. Table 3-1 Computer Setup (F10) Utility menu descriptions Heading Option Description File System Lists product name, SKU number, processor type/speed/stepping, cache size (L1/L2), memory Information type and size, integrated Media Access Control (MAC) for enabled or embedded Network Interface Card (NIC), if applicable, system BIOS type, chassis serial number, asset tracking number, and Boot Block Date. About Displays copyright information. Set Time and Date Enables you to set system time and date. Flash System Enables you to flash (update) system BIOS using any supported removable mass storage device ROM (CD-ROM, USB drive, floppy). Replicated Setup Save to Removable Media Saves the current F10 Setup configuration to a text file called cpqsetup.txt, which can be used for Replicated Setup functions. Restore from Removable Media Restores previous F10 Setup configuration from a text file called cpqsetup.txt, which can be used for Replicated Setup functions. Default Setup Save Current Settings as Default Stores the current F10 Setup configuration into the physical ROM as the default. Restore Factory Settings as Default Restores the original factory settings to the F10 Setup configuration information in the physical ROM as the default. Apply Defaults Saves the selected default settings (previously-saved user settings or factory settings) into Non- and Exit Volatile Random Access Memory (NVRAM) and exits. ENWW Computer Setup (F10) Utility 23