HP Xw8400 HP xw8400 Workstation - Service and Technical Reference Guide - Page 169
Appendix F — Power cord set requirements
UPC - 883585271085
View all HP Xw8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
F Appendix F - Power cord set requirements The power cord set (flexible cord or wall plug) received with this product meets the requirements for use in the country where you purchased the equipment. If you must obtain a power cord for a different country, purchase a power cord that is approved for use in that country. The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. The length of the cord must be between 1.8 m (6 feet) and 3.6 m (12 feet). If you have questions about the type of power cord to use, contact an HP authorized service provider. Route the power cord so that it is not likely to be walked on or pinched by items placed on it or against it. Pay particular attention to the plug, electrical outlet, and the point where the cord exits from the product. NOTE: Use a 15 A-capable (minimum) power cord with a 110V power source. Use a 10 A-capable (minimum) power cord with a 220V power source. ENWW 159