HP Xw8400 HP xw8400 Workstation - Service and Technical Reference Guide - Page 78
PCI slots, PCI retainer, Removing the PCI retainer,
UPC - 883585271085
View all HP Xw8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
3. Gently push out on the socket levers. 4. Lower the DIMM straight down, and ensure the socket levers secure the module into place. 5. Lower the memory fan until it snaps into place. NOTE: Ensure that all cables are clear of the fan housing when lowering the memory fan. PCI slots Figure 4-19 Identifying PCI slots Table 4-4 PCI slots Type Ref 1 PCI (32-bit, 33 MHz) J21 2 PCI Express x16 graphics J41 3 PCI x8 (x4 performance) J20 4 PCI Express x16 (x4 performance) J31 5 PCI-X 133 J22 6 PCI-X 100 J23 7 PCI-X 100 J23 PCI retainer For added protection, some cards have PCI retainers installed to prevent movement during shipping. Removing the PCI retainer 1. Disconnect power from the system ( Pre-disassembly procedures on page 50), and remove the access panel (Access panel on page 57). Place the workstation on its side with the system board facing up. 68 Chapter 4 Removal and replacement procedures ENWW