HP Xw8400 HP xw8400 Workstation - Service and Technical Reference Guide - Page 76
Installing memory module, CAUTION
UPC - 883585271085
View all HP Xw8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
4. Lift the DIMM straight up, and remove it from the unit. Figure 4-16 Removing DIMM NOTE: DIMMs and DIMM sockets are keyed for proper installation. Ensure that these guides align when installing a DIMM. Installing memory module CAUTION: HP only ships DIMMs that are electrically and thermally compatible with this product. Because third-party DIMMs might not be electrically or thermally compatible, they are not supported by HP. You must load memory modules in valid configurations: ● If loading only one DIMM, install it in slot 1. Otherwise, DIMMs must be loaded as matched pairs. ● If loading two DIMMs, install them in slots 1 and 3. ● If loading four DIMMs, install them in slots 1, 3, 5, and 7. ● If loading six DIMMs, install them in slots 1 through 5, and 7. ● If loading eight DIMMs, install them in all slots. 66 Chapter 4 Removal and replacement procedures ENWW