IBM 4560SLX User Guide - Page 16
Tape drives, Library controller board - guide
UPC - 087944855910
View all IBM 4560SLX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Tape drives The 4560SLX Tape Library supports a 0-drive, 1-drive, or 2-drive configuration as shown in Figure 6. All inactive tape drives are hot-swap capable. SCSI I/O is accomplished through two VHDCI-series 68-pin SCSI connectors located on the rear of the library directly under each tape drive as shown in Figure 7. 1 Tape drive 1 2 Tape drive 2 Figure 6. Tape drive locations 1 Drive 1 2 Drive 2 bay 3 VHDCI 68-pin connectors Figure 7. Tape drive connectors Library controller board The library contains a rear-access adapter cage (see Figure 8 on page 7) and a PCI backplane. This backplane contains the plug-in connectors for the library controller board and FCO card. 6 4560SLX Tape Library: User's Guide
Tape drives
The 4560SLX Tape Library supports a 0-drive, 1-drive, or 2-drive configuration as
shown in Figure 6. All
inactive
tape drives are hot-swap capable. SCSI I/O is
accomplished through two VHDCI-series 68-pin SCSI connectors located on the
rear of the library directly under each tape drive as shown in Figure 7.
Library controller board
The library contains a rear-access adapter cage (see Figure 8 on page 7) and a PCI
backplane. This backplane contains the plug-in connectors for the library controller
board and FCO card.
±1²
Tape drive 1
±2²
Tape drive 2
Figure 6. Tape drive locations
±1²
Drive 1
±2²
Drive 2 bay
±3²
VHDCI 68-pin connectors
Figure 7. Tape drive connectors
6
4560SLX Tape Library: User’s Guide