IBM 4560SLX User Guide - Page 43
Definition, Option and default description, Default value, Test Unit Ready - error
UPC - 087944855910
View all IBM 4560SLX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Table 3. SCSI configuration options (continued) Definition Option and default description Default value Library SCSI Bus This option enables you to set the library robotics Enabled Parity SCSI bus parity checking. SCSI Mode This option defines the loader as SCSI-2 or SCSI-3. SCSI-3 Mailslot access This option defines when the mailslot is accessible. Prevent/Allow Medium Command Determines Access Unit Attention Reporting This option enables you to select reporting of all or only one stacked-unit attention conditions. If set to all, the unit reports all unit attention conditions in sequence. If set to one, the unit reports only the highest priority condition. Report All Init Element Status This option enables you to specify the library response to the SCSI INITIALIZE ELEMENT STATUS command. The possible settings are no inventory, force inventory, and force label scan. No Inventory Test Unit Ready Reporting This option enables you to specify the response to a TEST UNIT READY command if the library is in sequential mode. The possible settings are standard or custom. Standard returns check condition not ready and custom returns good status. Standard Device Capability Page Length This option enables you to choose between two lengths of the mode sense/select device capabilities page (SCSI page 1Fh), which are short (14 bytes) and long (18 bytes), to accommodate different SCSI device implementations of this page. Short (14 bytes) Transport Element This option enables you to set the base address for 0 Base Address the robotics mechanism. Storage Element Base Address This option enables you to set the base address for 20 the magazine slots. Transfer Element This option enables you to set the base address for 1E0 Base Address the tape drives. Import/Export Element Base Address This option enables you to set the base address for 1C0 the mail slot. Product Identification This option enables you to specify the response of 4560SLX the library robotics to the SCSI INQUIRY command in the product ID fields. Vendor Identification This option enables you to specify the response of IBM the library robotics to the SCSI INQUIRY command in the vendor ID field. Post Recovered Errors This option enables you to set the post recovered errors. Disabled Chapter 4. Operation 33