Icom F3400D / F4400D Operation Guide - Page 106
◇ Transmitting an MDC Stun call
View all Icom F3400D / F4400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Previous view 8 MDC 1200 SYSTEM OPERATION Transmitting a call (Continued) DDTransmitting an MDC Stun call An MDC Stun call remotely disables the transceiver. 1. Push [Call Menu] to display the Call Menu screen. 2. Push [Up] or [Down] to select a station ID, then push [OK]. ••After receiving an acknowledgement, "Success" is displayed. 3. Push [Up] or [Down] to select "Stun." ••When the transceiver does not receive an acknowledgement, "Failed" is displayed. 4. P ush [PTT] to transmit an MDC Stun call. ••After transmitting the Stun call, returns to the Standby screen. 8-10
8
MDC 1200 SYSTEM OPERATION
8-10
Transmitting a call (Continued)
D
Transmitting an MDC Stun call
An MDC Stun call remotely disables the transceiver.
<Key operation>
1.
Push [Call Menu] to display the Call Menu screen.
2.
Push [Up] or [Down] to select a station ID, then
push [OK].
3.
Push [Up] or [Down] to select “Stun.”
4.
Push [PTT] to transmit an MDC Stun call.
• After receiving an acknowledgement, “Success” is
displayed.
• When the transceiver does not receive an
acknowledgement, “Failed” is displayed.
• After transmitting the Stun call, returns to the Standby
screen.