Icom F3400D / F4400D Operation Guide - Page 33
Selecting a Zone, NOTE: For the Mobile Segment type
View all Icom F3400D / F4400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Previous view 3 BASIC OPERATION Selecting a Zone DDSelecting a Zone Select a Zone type as shown: Conventional, Multi-site Conventional, LTR, Single-site Trunking, Multi-site Trunking or Voting TIP: What is a "Zone"? Certain channels are grouped together and assigned to a Zone according to their intended use. For example, 'Staff A' and 'Staff B' are assigned to a "Business" Zone, and 'John' and 'Cindy' are assigned to a "Private" Zone. Portable: For all types Mobile: For all types zzRotate [Selector]*. (Only the Portable type) *When "Zone" is assigned. zzPush [Zone Up] or [Zone Down]. zzPush [Zone Select] to display the "Zone Select" screen. Then, push [Up] or [Down] to select a Zone. After selecting, push [OK]. NOTE: For the Mobile Segment type To select a Zone, see "Selecting a channel" as described on page 3-4. TIP: For the Portable Non-display type Zones and Memory channels are assigned to a [Selector] position. Rotate [Selector], to set the assigned Zone and channel to be used. Portable: For the Ten-key and the Simple key types Mobile: For the LCD type (Menu > Channel/Scan > Zone Select) 1. Push [Menu] to display the Menu screen. 2. Push [Left] or [Right] to select "Channel/Scan," then push [OK]. 3. Push [Up] or [Down] to select "Zone Select," then push [OK]. ••Displays the "Zone Select" screen. 4. Push [Up] or [Down] to select a Zone, then push [OK]. 5. The selected Zone is displayed. 3-3