Icom F3400D / F4400D Operation Guide - Page 108
◇ Transmitting an MDC Revive call
View all Icom F3400D / F4400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Previous view 8 MDC 1200 SYSTEM OPERATION Transmitting a call (Continued) DDTransmitting an MDC Revive call An MDC Revive call revives a stunned transceiver to normal operation. 1. Push [Call Menu] to display the Call Menu screen. 2. Push [Up] or [Down] to select a station ID, then push [OK]. ••After receiving an acknowledgement, "Success" is displayed. 3. Push [Up] or [Down] to select "Revive." ••When the transceiver does not receive an acknowledgement, "Failed" is displayed. 4. P ush [PTT] to transmit an MDC Revive call. ••After transmitting the Revive call, returns to the Standby screen. 8-12
8
MDC 1200 SYSTEM OPERATION
8-12
Transmitting a call (Continued)
D
Transmitting an MDC Revive call
An MDC Revive call revives a stunned transceiver to
normal operation.
<Key operation>
1.
Push [Call Menu] to display the Call Menu screen.
2.
Push [Up] or [Down] to select a station ID, then
push [OK].
3.
Push [Up] or [Down] to select “Revive.”
4.
Push [PTT] to transmit an MDC Revive call.
• After receiving an acknowledgement, “Success” is
displayed.
• When the transceiver does not receive an
acknowledgement, “Failed” is displayed.
• After transmitting the Revive call, returns to the
Standby screen.