Icom F3400D / F4400D Operation Guide - Page 165
Push [F2] or [F3] to select A7., the TX Noise Cancel level.
View all Icom F3400D / F4400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Previous view 12 USER SETTINGS Setting the TX Noise Cancel level (Continued) Mobile: For the Segment types 1. Turn OFF the transceiver. 2. While holding down [F2] and [F3], turn ON the transceiver. Continue holding down [F2] and [F3] for about 3 seconds. ••2 beeps sound. 3. Hold down [F1] for 1 second to enter the Set mode. 4. Push [F2] or [F3] to select "A7." 5. Push [Up] to increase, or push [Down] to decrease the TX Noise Cancel level. LLInformatio ••The setable range is 1 ~ 3, or OFF. ••When "OFF" is selected, the microphone input noise is not suppressed. ••A beep sounds after pushing [Up] or [Down]. An error beep sounds if you try to exceed the setable range. 3 : Push [Up] 2 : Push [Down] 1 OFF 6. Hold down [F1] for 1 second to exit the Set mode. 7. Turn OFF the transceiver, then turn it ON again to normally operate it. [Up] F1 F2 F3 [F1] [F2] [F3] [Down] Power key 12-13